User manual FUJIFILM FINEPIX J12

[. . . ] Getting Ready Using the Camera Advanced Features · Photography · Playback · Movie Settings OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix J10 / FinePix J12 correctly. Please follow the instructions carefully. Camera Connection Software Installation Appendices Troubleshooting BL00710-201(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please read the Safety Notes (separate note "Notes and Cautions") and make sure you understand them before using the camera. Perchlorate Material-special handling may apply, See http://www. dtsc. ca. gov/hazardouswaste/ perchlorate. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The software may not operate correctly when you use an extension cable, or if you connect the camera via a USB hub. · When your PC has more than one USB port, the camera can be connected to either port. · When Windows 98 SE is used, the supplied software must be installed first before connecting the camera to a PC using the USB cable. The PC will not recognize the camera if it is connected before installation. · A memory Card, the internal memory, data in a Memory Card or data in the internal memory could be damaged if any of the following are performed; - the USB cable is disconnected - power switch or buttons are pressed, or the lens cover is interfered with 98 The following steps differ depending on the PC's operating system (Windows 2000/XP/ Vista case) When your PC recognizes the camera automatically, FinePixViewer S automatically starts up and the Load photos window appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Menu] button. CAUTION When there are many images stored on a Memory Card, it takes a while to display on the screen of your PC. Also, it may take a while to import images or you may be unable to save images. In this case, use an Image Memory Card Reader. MEMO · You can only see images saved on a PC. · If you cancel saving by clicking the [Cancel] button, press ON/OFF to turn off the camera and then disconnect it from the PC. · When the camera is connected to your PC, FinePixViewer automatically starts up by the function of Exif Launcher, which is installed in FinePixViewer. Proceed to "Using FinePixViewer" (p. 100). CAUTION (Mac OS X) If FinePixViewer does not start up automatically, the software may not be installed correctly. Set your PC again after disconnecting the camera and restart. CAUTION (Mac OS X) Note on disconnecting the camera · Close all files in the camera, and make sure the camera is not exchanging data. · The camera and PC may be exchanging data even when [Copying] disappears from your PC screen, especially in the case of copying large data amounts. Do not disconnect the USB cable (included), immediately after this message has disappeared. Always check that the indicator lamp is off first before disconnecting. Software Installation 99 Connecting to a PC Using FinePixViewer Mastering FinePixViewer For all information on FinePixViewer functions, refer to [How to Use FinePixViewer] in the Help menu for details. · What is explained in [How to Use FinePixViewer]. . . [How to Use FinePixViewer] covers a range of topics, including batch processing and ordering prints. Example: Looking up slide shows A Click [How to Use FinePixViewer] in the FinePixViewer Help menu. B Click [Basic Operation] and then click [Slide Show] in the menu that appears. Press the [<<<] key to view the previous page or the [>>>] key to view the next page. Uninstalling the software Only perform this operation when you no longer require the installed software or when the software was not installed correctly. Windows A Check that the camera is not connected to the PC. [. . . ] Do not use 3 Notes on both models ( 1 , 2 ) charged and discharged batteries together. · Do not use different types or brands of batteries at AC Power Adapter the same time. Always use the AC Power Adapter (sold separately) · If you do not intend to use the camera for a long with the camera. The use of an AC Power adapter period of time, remove the batteries from the other than FUJIFILM AC Power Adapter (sold camera. [. . . ]