User manual FUJIFILM FINEPIX S20 PRO

[. . . ] Getting Ready Using the Camera Advanced Features Settings Software Installation This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S20 Pro correctly. Please follow the instructions carefully. Viewing Images BL00291-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. [. . . ] 2 Attach the synchronization cord from the external flash to the Sync terminal on the camera by pushing the cord into the terminal securely. 2 0 Sync terminal Sync terminal cap Synchronization cord !G Built-in and external flash units cannot be used at the same time. 3 The mode can be set to "N", "M", "<" (P. 41, 42, 43) or ">" (P. 44), but the use of "<" or ">" is better. !G Flash photography cannot be used when continuous shooting (P. 50) or auto bracketing (P. 51) is selected. 65 STILL PHOTOGRAPHY MENU STILL PHOTOGRAPHY MENU When the white balance is incorrect Adjust the white balance to match the external flash. In "A" in the Photography menu (P. 59), select "O, P" Custom white balance. Press the "MENU/OK" button. Click Hold a sheet of white paper so that it fills the entire screen. When pressing the Shutter button, the flash fires and the white balance is set. !G After you take the picture, please check the "Color (White Balance)" setting for the image. i Set "IMAGE DISP. " to "PREVIEW" in the SET-UP screen (P. 83). i Set the Power switch to "w" (P. 19). or When "" or "" appears, the white balance was not measured at the correct exposure. Set the exposure compensation again, using a negative value (­) when "" appears and a positive value (+) when "" appears. 66 MOVIE MODE r RECORDING MOVIES Set the Mode dial to "r". Use "r" Movie mode to record movies with sound. h Specifications Motion JPEG with monaural sound Quality selection method % (640 × 480 pixels) $ (320 × 240 pixels) h Frame rate 30 frames per second 1 !G Changing the quality (movie size) setting (P. 32). G The available recording time for a video may decrease depending on the amount of free space on the media. G Because a movie is recorded onto the media as it is saved, it cannot be recorded correctly if the camera suddenly loses power (if you open the battery cover or disconnect the AC power adapter). It may not be possible to playback your movies on other cameras. I Recording times for media These figures are the available recording times using a new media formatted on the camera. The actual recording times will vary depending on the free space available on the media. Media capacity DPC-16 (16 MB) DPC-32 (32 MB) xD-Picture Card DPC-64 (64 MB) DPC-128 (128 MB) DPC-256 (256 MB) DPC-512 (512 MB) Microdrive MK-1 (340 MB) MK-2 (1 GB) Quality % (30 frames per second) 13 sec. 15. 3 min. $ (30 frames per second) 26 sec. 30. 1 min. Advanced Features 2 The available recording time and "oe" appear on the screen. !G Because sound is recorded concurrently with the images, ensure that you do not cover the microphone with a finger, etc. (P. 9). 3 Press the Zoom button to zoom in or out before you start recording. You must zoom beforehand as you cannot zoom during recording. h Optical zoom focal length (35 mm camera equivalent) Approx. [. . . ] Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not place heavy objects on the camera. [. . . ]