User manual FUJIFILM FINEPIX A330

[. . . ] 1 2 3 4 5 6 Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A330/FinePix A340 correctly. Please follow the instructions carefully. BL00359-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. [. . . ] When this setting is enabled, the specified time difference is applied when pictures are taken. Use this function when traveling to destinations in different time zones. 1 Press "d" or "c" to change between "TM HOME" and "£ LOCAL". To set the time difference, select "£ LOCAL". TM HOME : Your home time zone £ LOCAL : Your destination time zone 2 1 0 2 0 1 Press "a" or "b" to select "TIME DIFFERENCE". 2 Press "c". 4 Settings 3 1 0 2 0 1 Press "d" or "c" to select ±, hour and minute. 2 Press "a" or "b" to correct the setting. h Available time settings -23:45 to +23:45 (in 15 minutes increments) Continued 51 SET-UP 4 Always press the "MENU/OK" button to complete the settings. 5 When the photography mode is selected with world time set, "£" appears on the LCD monitor for 3 seconds. FRAME NO. CONT. RENEW A B Formatted xD-Picture Card used for both A and B. CONT. : Pictures are stored beginning from the highest file number stored on the last xDPicture Card used. RENEW: Pictures are stored on each xD-Picture Card beginning with a file number "0001". Setting this function to "CONT. " makes file management easier as it ensures that file names are not duplicated when images are downloaded to a PC. ! When the camera settings are "qRESET", the frame number setting ("CONT. " or "RENEW") is changed to "CONT. " and the frame number itself does not return to "0001". When the xD-Picture Card already contains image files with file numbers higher than the highest file number on the last xD-Picture Card, images are stored beginning from the highest file number on the current xD-Picture Card. Directory number File number Frame number Check the file number by viewing the image. The last 4 digits of the 7-digit number in the top right corner of the LCD monitor are the file numbers, while the first 3 digits show the directory number. ! When changing the xD-Picture Card, always turn the camera off before opening the battery cover. Opening the battery cover without turning the camera off may cause the frame number memory to not function. Once 9999 is exceeded, the directory number changes from 100 to 101. The displayed frame number may differ for images photographed on other cameras. If "æ" appears, see P. 78. 52 5 Software Installation Operating System1 5. 1 INSTALLATION ON A Windows PC Pre-installation checklist To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Windows 98 (including the Second Edition) Windows Millennium Edition (Windows Me) Windows 2000 Professional2 Windows XP Home Edition2 Windows XP Professional2 200 MHz Pentium or better recommended (800 MHz Pentium III or better recommended for Windows XP) 64 MB minimum (128 MB minimum for Windows XP), 256 MB or more recommended Amount required for installation: 450 MB minimum Amount required for operation: 600 MB minimum (When using ImageMixer VCD2 for FinePix: 2 GB or better) 800 × 600 pixels or better, 16-bit color or better (When using ImageMixer VCD2 for FinePix: 1024 × 768 or better) i To use FinePix Internet Service or mail attachment function: An Internet connection and e-mail transmission software i Connection speed: 56 k or better recommended CPU RAM Hard disk space Display Internet connection3 1 Models with one of the above operating systems pre-installed. 2 When you install the software, log in using a system administrator account (e. g. 3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet connection. Notes i Connect the camera directly to the computer using the USB cable (included). [. . . ] Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. Keep out of the reach of small children. This product could cause injury in the hands of a child. [. . . ]