User manual FUJIFILM FINEPIX E500

[. . . ] 1 2 3 4 5 6 OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix E500 / FinePix E510 correctly. Please follow the instructions carefully. Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images BL00402-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Playback stops when the end of the movie is reached. Pause/Resume Pauses the movie during playback. Press "b" again to resume playback. Press "d" or "c" while playback is stopped to go back to the previous file or advance to the next file respectively. Stop Fast forward/Rewind Rewind Fast forward Press "d " or "c " during playback to skip forwards or backwards through the movie. Skip playback When paused Press "d " or "c " when the movie is paused, the movie advances or goes back one frame. Hold down "d" or "c" to move through the frames quickly. Playing movie files i You may not be able to play back some movie files recorded on other cameras. i To play back movie files on a PC, save the movie file on the xD-Picture Card to the PC's hard disk and then playback the saved file. 66 67 4 Settings 1 10 2 0 fi ADJUSTING THE MONITOR BRIGHTNESS / VOLUME 1 Set the Mode switch to "q" or "w". 2 Press the "MENU/OK" button to display the menu on the LCD monitor. SET-UP F USING THE SET-UP SCREEN 13 1 00 2 0 1 Press the "MENU/OK" button to display the menu on the LCD monitor. 2 Press "d" or "c" to select "F" OPTION and then press "a" or "b" to select "SET-UP". 3 Press the "MENU/OK" button to display the SET-UP screen. ! Always 1 20 2 0 1 Press "d" or "c" to select "F" OPTION and then press "a" or "b" to select "fi LCD" or "VOLUME". 2 Press the "MENU/OK" button. turn the camera off when replacing the batteries. Opening the battery cover or disconnecting the AC power adapter without turning the camera off may cause the camera settings to revert to the factory default values set at shipment. 2 Press "d" or "c" to move to options 1 to 4. 3 1 0 2 0 1 Press "d " or "c " to adjust the monitor brightness or the volume. 2 Press the "MENU/OK" button to confirm the new setting. 1 30 2 0 1 Press "a" or "b" to select a menu option. 2 Press "d" or "c" to change the setting. Press "c" for "FORMAT", "DATE/TIME", "TIME DIFFERENCE", "DISCHARGE" or "q RESET". 4 Settings SET-UP menu options The options available in the F menu vary depending on whether the "q" or "w" mode is selected. h "B, m, , , . , /, N, M, <, >" Photography mode h "r" Movie mode h "w" Playback mode 4 After you have changed the settings, press the "MENU/OK" button to confirm the changes. 68 In N, M, <, > 69 SET-UP SET-UP menu options Settings IMAGE DISP. POWER SAVE SETTING Factory default ON Display ON/OFF Explanation Specifies whether the preview images (the photographed images) are displayed after taking a picture. The image appears for a few moments and is then recorded. Reduces the camera's power consumption and sets the time when camera turns off. Specifies whether the LCD monitor is ON or OFF when the camera is turned on in Photography mode. Sets the volume of the tone emitted when the camera controls are used. Sets the volume of the sound emitted when the shutter operates. Specifies whether frame numbers are assigned consecutively from previous numbers or begin again. ¶: DSC (Mass storage device) mode page ­ 1 POWER SAVE FORMAT q LCD § BEEP 2 MIN/5MIN OK ON/OFF OFF/1/2/3 OFF/1/2/3 SET SET CONT. /RENEW 2 MIN ­ ON 2 2 ­ ­ CONT. 71 71 ­ ­ ­ 13 72 73 When this function is enabled and the camera is not used for 60 seconds, the screen temporarily turns off (sleep mode) and the viewfinder lamp blinks at 1-second intervals to save power. If the camera remains unused for 2 or 5 minutes, it is turned off. [. . . ] Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not place heavy objects on the camera. [. . . ]