User manual FUJIFILM FINEPIX S7000

[. . . ] Getting Ready Using the Camera Advanced Features Settings Software Installation This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S7000 correctly. Please follow the instructions carefully. Viewing Images BL00304-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] the Photography mode exits Multiple exposure mode without recording the images. Ordinary external flash units can be used. However, some camera-specific flash units cannot be used. 3 2 From the 2nd shot onwards, the yellow "T" icon appears on the screen. The mode can be set to "N", "M", "<" (P. 41, 42, 43) or ">" (P. 44), but the use of "<" or ">" is recommended. !G Flash photography cannot be used when continuous shooting (P. 50) or auto bracketing (P. 51) is selected. 64 Continued 65 STILL PHOTOGRAPHY MENU STILL PHOTOGRAPHY MENU External flash settings (for flashes with automatic flash control) For external flash, refer to the user's manual for the flash and specify the settings as described below. h Select External flash mode (TTL mode cannot be used). h Match the settings to the camera aperture setting. Set the flash for the aperture setting measured by the camera. h Match the sensitivity setting ( P. 33) to the setting on the camera. MOVIE MODE r RECORDING MOVIES Set the Mode dial to "r". Use "r" Movie mode to record movies with sound. h Specifications Motion JPEG with monaural sound Quality selection method % (640 × 480 pixels) $ (320 × 240 pixels) h Frame rate 30 frames per second 4 F AUTO MODE ISO 1 SELECT !G Changing the quality (movie size) setting (P. 32). G The available recording time for a video may decrease depending on the amount of free space on the media. G Because a movie is recorded onto the media as it is shot, it cannot be recorded correctly if the camera suddenly loses power (if you open the battery cover or disconnect the AC power adapter). When the white balance is incorrect Adjust the white balance to match the external flash. In "A" in the Photography menu (P. 60), select "O, P" Custom white balance. Press the "MENU/OK" button. It may not be possible to playback your movies on other cameras. I Recording times for media These figures are the available recording times using a new media formatted on the camera. The actual recording times will vary depending on the free space available on the media. Media capacity DPC-16 (16 MB) DPC-32 (32 MB) xD-Picture Card DPC-64 (64 MB) DPC-128 (128 MB) DPC-256 (256 MB) DPC-512 (512 MB) Microdrive MK-1 (340 MB) MK-2 (1 GB) Quality % (30 frames per second) 13 sec. 15. 3 min. $ (30 frames per second) 26 sec. 30. 1 min. Advanced Features Click Hold a sheet of white paper so that it fills the entire screen. Pressing the Shutter button, the flash fires and the white balance is set. 2 !G After you take the picture, please check the "Color (White Balance)" setting for the image. i Set "IMAGE DISP. " to "PREVIEW" in the SET-UP screen (P. 83). i Set the Power switch to "w" (P. 19). The available recording time and "oe" appear on the screen. !G Because sound is recorded concurrently with the images, ensure that you do not cover the microphone with a finger, etc. [. . . ] When an xD-Picture Card is removed, the card may fly completely out of the slot. Use your finger to stop the card from flying out before removing the card. If an xD-Picture Card is allowed to fly out, it could hit someone and cause injury. Request regular internal testing and cleaning for your camera. [. . . ]