User manual FUJITSU SIEMENS SCALEO XI AMILO NOTEBOOK WIEDERHERSTELLUNG INSTALLIERTER SOFTWARE RESTORING INSTALLED SO

[. . . ] Com/support All rights reserved, including rights created by patent grant or registration of a utility model. All designations used in this document may be trademarks, the use of which by third parties for their own purposes could violate the rights of their owners. Wenn die Aufforderung "Press any key to boot from CD or DVD . Wenn die Aufforderung "Press any key to boot from CD or DVD . [. . . ] If you have not assigned a password for the user selected, leave the "Password" field empty. In the following "System Recovery Options" menu, select the option "Fujitsu Siemens Computers Recovery" with the sub-item "Easy backup and recovery of your system". This will give you access to the DVD burner, click on "Next". select a storage medium under "Select type of disk" , click on "Next". You will then be asked to name the medium. This labelling is necessary to ensure that the media do not become mixed up during the restore process. Insert the first disk in the drive of your burner and close the drive. The duration of the process is dependent on the configuration of your system and may therefore take several minutes. When prompted, insert the next disk into the drive. Your personal data could be lost during restoration of the factory default settings. The operating system is restored on the system partition on which the factory default settings were installed. Data on other partitions or hard disks is unaffected by this restore processes. Should your system be attacked by 'uninvited guests' from the Net, such as viruses, reformat all hard disks and restore your system with the system restore disks provided with the computer or which you have created. Caution If you would like to set up a RAID system on your PC or notebook, you must create your system restore disks before you do so. If you need to use these disks, it may first be necessary to terminate the RAID connection. Please also note that, in the case of RAID systems already installed, it is possible that restoring the hard disk as described below may not function. Personal data could be lost during restoration of the factory default settings. proceed as follows to restore the factory default settings: 1. Turn your machine on or: If the PC is already running, switch the machine off, wait for a moment and then switch it on again. During the boot process, press the F8 key at very frequent intervals, until the menu "Advanced Boot Options" appears. Repeat this process if necessary in order to gain access to this menu. The "Advanced Boot Options" menu will offer you the "Repair your Computer" function. [. . . ] Respond with "Cancel" to any "New Hardware Search Wizard" dialogues that appear. After fully completing the installation, close the window. If you wish to install drivers, software or hot fixes manually, follow the directions under the item "Manual Installation". A search will now be made for elements that match your selection. [. . . ]