User manual FUJITSU SIEMENS SCENIC 5H PCI

[. . . ] PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc. Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. [. . . ] Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! i Ê Ë Ú Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. Supplementary information, remarks, and tips follow this symbol. Text which follows this symbol describes activities that must be performed in the order shown. This symbol indicates that you must enter a blank space (press the Space Bar) at this point. This symbol indicates that you must press the Enter key. Text in this typeface indicates screen outputs. Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items. "Quotation marks" indicate names of chapters or terms. Important notes With the mainboard installed you must open the system to access the mainboard. How to dismantle and reassemble the system is described in the operating manual accompanying the system. Connecting cables for peripherals must be adequately shielded to avoid interference. ! Observe the safety notes in the operating manual of your system. Incorrect replacement of the lithium battery may lead to a risk of explosion. Only AGP boards with 1. 5 V are supported. IDE hard disk controller connected to PCI bus for up to four IDE drives (e. g. IDE hard disk drives, ATAPI CD-ROM drives) The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4. Floppy disk drive controller (possible formats: 720 KB, 1. 44 MB, 2. 88 MB) The mainboard supports booting from a 120 MB IDE floppy disk drive. Real-time clock/calendar with integrated battery backup 4 internal USB ports (C / D and E / F) 1 internal serial port for chipcard reader (SmartCard reader). 1 external parallel port (ECP- and EPP-compatible) 1 external serial port (16C550 compatible with FIFO) 2 external PS/2 ports for keyboard and mouse 2 external USB ports (A / B) External ports 13 4 5 6 8a 8b 8c 2 7 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port Serial port Parallel port VGA LAN connector 7 = USB ports A and B 8a = Audio Line-Out Headphones 8b = Audio Line-In 8c = Audio Micro-In The components and connectors marked are not necessarily present on the mainboard. 4 - English A26361-D1381-Z120-3-7419 Features Internal ports and connectors 1 23 4 56 7 8 9 10 DIMM 2 DIMM 1 11 12 13 AG P 18 PCI 1 17 1= 2= 3= 4= 5= 6= 7= 8= 9= Power supply ATX Floppy Disk Drive IDE drives 3 and 4 (secondary) Connector for front panel Switches Jumpers IDE drives 1 and 2 (primary) Fan 2 Power On LED II 10 = 11 = 12 = 13 = 14 = 15 = 16 = 17 = 18 = 16 15 14 Cover monitoring USB ports C / D USB ports E / F COM2 SP/DIF (digital Audio) Audio front panel CD audio input Power supply +12 V Fan 1 The components and connectors marked are not necessarily present on the mainboard. PCI 2 PCI 3 A26361-D1381-Z120-3-7419 English - 5 Features Hard disk connection An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the mainboard. LAN connector This mainboard has an optional Intel 82550ET LAN controller which supports transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Packet. It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP and Intel PXE are supported. The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode). 2 = Link Mode: the LAN connection is active. [. . . ] Insert the memory module into the location (1). At the same time flip the lateral holders upwards until the memory module snaps in place (2). Removing a memory module 1 1 Ê Ê Push the clips on the right and left of the compartment outward (1). Pull the memory module from the compartment (2). A26361-D1381-Z120-3-7419 English - 11 Add-on modules Replacing the lithium battery In order to permanently save the system information, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding error message notifies the user when the charge is too low or the battery is empty. [. . . ]