User manual FUJITSU SIEMENS SCENIC E320 (I915G)

[. . . ] All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Right of technical modification reserved. Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1 Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connectors and Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CPU Fan connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Internal serial (COM2) port (external via wire) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power supply ATX connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Power on switch connector (ON/OFF switch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wake on LAN (WOL) connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front panel connector (version 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front panel connector (version 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hold components by the edge, don't touch their leads. Use a grounded wrist strap. Place the mainboard and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i. e. the thin plastic plate between battery and contact spring). 2 - English A26361-D1115-Z180-5-7619 Mechanics Mechanics Layout µ-ATX 9, 6" x 8'' (243, 84 mm x 203, 2 mm) Some of the following connectors are optional and may therefore not be included on your mainboard. 1 2 AGP PCI3 PCI2 S lo t 1 2 5 1 3 1 = Serial port 1 2 = PS/2 mouse port 3 = PS/2 keyboard port 4 6 4 = Parallel interface 5 = USB connection 2 6 = USB connection 1 PC I1 IS A A26361-D1115-Z180-5-7619 English - 3 Mechanics 1 2 3 4 5 6 78 9 10 1 2 AGP PCI3 PCI2 S lo t 1 1= 2= 3= 4= 5= Fan (e. for the processor) Serial port 2 Power supply IDE drives 3 and 4 (secondary) 6 = Floppy disk drive 7 = ON/OFF switch 8 = Wake On LAN (WOL) 9 = IDE drives 1 and 2 (primary) 10 = Front panel connector The components and connectors marked do not have to be present on the system board. 4 - English PC I1 A26361-D1115-Z180-5-7619 IS A Mechanics Connectors and Jumpers ! Some of the following connectors are optional! CPU Fan connector 1 Pin 1 2 3 Signal GND Fan power supply Not connected Notes Internal serial (COM2) port (external via wire) 2 1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Signal DCD 2 (low asserted) DSR 2 (low asserted) SIN 2 (high asserted) RTS 2 (low asserted) SOUT 2 (high asserted) CTS 2 (low asserted) DTR 2 (low asserted) PC_ON_Strobe GND VCC Auxiliary EXT SMI (low asserted) VCC RESETDRV (high asserted) GND GND Key Notes A26361-D1115-Z180-5-7619 English - 5 Mechanics Power supply ATX connector 20 11 10 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Signal +3. 3 V +3. 3 V GND +5 V GND +5 V GND Powergood (high asserted) +5 V Auxiliary +12 V +3. 3 V -12 V GND PS on (low asserted) GND GND GND -5 V +5 V +5 V Notes 1 Power on switch connector (ON/OFF switch) Pin 1 2 Signal GND Power on pulse (low asserted) Notes 1 Wake on LAN (WOL) connector 1 Pin 1 2 3 Signal +5 V Auxiliary GND Wake pulse (high asserted) Notes 6 - English A26361-D1115-Z180-5-7619 Mechanics Front panel connector (version 1) 2) Message LED 1) 2) 2) Reset adapter HD-LED Power On LED 1 2 SCSI LED Input 2) 3) Speaker 2) 1) Reset adapter from 4pin female to 2pin male. 2) Cable is not included in the delivery scope. 3) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Reserved Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Anode Message LED Cathode Message LED Key Anode HD_LED Cathode HD_LED GND (for Reset and Power button) Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key Key Key pin Key Key Key Not connected SCSI LED Input SCSI LED Input Not connected A26361-D1115-Z180-5-7619 English - 7 Mechanics Front panel connector (version 2) Reset 1) 1) Message LED 1) 1) HD-LED Power On LED 1 2 Power On/Off SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Reserved Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Anode Message LED Cathode Message LED Key Anode HD_LED Cathode HD_LED GND (for Reset and Power button) Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key pin Key Not connected SCSI LED Input SCSI LED Input Not connected Key GND GND GND 8 - English A26361-D1115-Z180-5-7619 Mechanics Configuration Clock frequency ! The switches may only be set as specified in the tables below for the particular Pentium II or Celeron used. There are also Pentium II and Celeron processors, which automatically always operate at the proper frequency, regardless of the switch position. As these new processors do not differ externally from the previous processors, we recommend always setting the switches in accordance with the processor. [. . . ] This system board you may use with Pentium II processors with 66 MHz and 100 MHz Front Side Bus or with Celeron processors with 66 MHz Front Side Bus. Information on which processors can be used is available from your sales office or the customer service center. Pentium II with 66 MHz Front Side Bus: Processor 300 MHz 333 MHz switch 5 off on switch 6 on off switch 7 off off switch 8 on on Celeron with 66 MHz Front Side Bus: Processor 233 MHz 266 MHz 300 MHz 333 MHz 366 MHz 400 MHz 433 MHz switch 5 off on off on off on off switch 6 off on on off off on on switch 7 on off off off off on on switch 8 on on on on on off off Pentium II with 100 MHz Front Side Bus: Processor 350 MHz 400 MHz 450 MHz switch 5 off on off switch 6 off on on switch 7 on off off switch 8 on on on Pentium III with 100 MHz Front Side Bus: Processor 450 MHz 500 MHz 550 MHz 600 MHz 600 MHz 700 MHz switch 5 off on off on on on switch 6 on off off on on off switch 7 off off off on on on switch 8 on on on off off off A26361-D1115-Z180-5-7619 English - 9 Mechanics Functions controlled by the switch block Function Password Skip Off Recovery BIOS Off Floppy write protect Off SW1 on off X X X X SW2 X X on off X X SW3 X X X X on off SW4 X X X X X X i Switch 4 (SW4) is reserved! Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Onboard power supply Voltage +5. 1 V +12 V -12 V +3. 3 V +5. 0 V 1. 8 - 3. 5 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % ±5 % Maximum current Comment 15 A 300 mA 100 mA 4A 50 mA 14 A Power loadability Fuse number 1 Maximum Fuse current 750 mA Function Universal serial bus (USB) Port A Keyboard Mouse Universal serial bus (USB) Port B Maximum function current 500 mA Not specified Not specified 500 mA 2 750 mA 10 - English A26361-D1115-Z180-5-7619 Installing drivers Installing drivers Insert the "Drivers & Utilities" CD. If the CD doesn't start automatically call the START. EXE file in the main directory of the CD. If the system board list is displayed select the system board or select under Driver the operating system used and the audio and video drivers. Upgrades Main memory Support: The system needs at least one module and can manage at most two SDRAM modules. [. . . ]