User manual FUJITSU SIEMENS SCENIC P320 (SIS661+)

[. . . ] All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Right of technical modification reserved. Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connectors and Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 I2C connector (for ambient/external temperature sensor) for optional temperature sensor (LM75). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Internal chipcard reader or serial port 2 (COM2) (external via wire) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power supply ATX connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wake on LAN (WOL) connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Power on switch connector (ON/OFF switch). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fan 2 connector for system fan or CPU fan (if external temperature sensor is in use) . . . . . . . 6 Front panel connector (version 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front panel connector (version 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 USB chipcard reader connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Fan 1 connector for CPU fan or system fan (if external temperature sensor is in use) . . . . . . . 9 Power supply monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Intrusion connector for case open detect for optional push-button (opener) . . . . . . . . . . . . . . . . . . . . . 10 System configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 14 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Power requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Power loadability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Upgrades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Main memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Message BIOS update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 The screen stays blank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 A26361-D1107-Z180-10-7619 Introduction i This system board is available in different configuration levels. 2) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Reserved Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Anode Message LED Cathode Message LED Key Anode HD_LED Cathode HD_LED GND (for Reset and Power button) Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key pin Key Not connected SCSI LED Input SCSI LED Input Not connected Key GND GND GND 8 A26361-D1107-Z180-10-7619 Mechanics USB chipcard reader connector 2 1 Pin 1 3 5 7 9 11 13 Signal P3V3P_DUAL Data negative output up Data negative GND Chipcard present (high asserted) P3V3P Chipcard reader On (low pulse) Pin 2 4 6 8 10 12 14 Signal VCC Data positive up Data positive down GND VCC Auxiliary Power OK (low asserted) Key Fan 1 connector for CPU fan or system fan (if external temperature sensor is in use) Pin Signal 1 1 GND 2 6 - 12 V; 0 V 3 Fan sense Refer to chapter "Temperature monitoring / system monitoring" in the Technical Manual. Power supply monitoring 1 Pin Signal 1 Monitor on 2 PS FAN off request (low asserted) 3 PS FAN full on (low asserted) 4 PS FAN pulse 5 SMB CLK 6 SMB DATA 7 VCC EEPROM 8 GND Refer to chapter "Temperature monitoring / system monitoring" in the Technical Manual. A26361-D1107-Z180-10-7619 9 Mechanics Intrusion connector for case open detect for optional push-button (opener) 1 Pin Signal 1 GND 2 Case open (low asserted) 3 Present (low asserted) Refer to chapter "Temperature monitoring / system monitoring" in the Technical Manual. System configurations Systems with . . . (ACPI- mode) A fast blinking (five times a second) of the LED signals a hardware problem. More detailed information are shown with an additional System Monitoring Software or on the monitor after reboot entering BIOS Setup (menu Advanced System Management ) . The fast blinking LED can have several different causes. - a necessary sensor is missing or defect - an available sensor has overtemperature - a fan is defect or not working properly - a software is responsible for blinking BIOS: Please refer to BIOS description on the including CD-ROM. 12 A26361-D1107-Z180-10-7619 Mechanics Configuration Clock frequency ! The switches may only be set as specified in the tables below for the particular Pentium II or Celeron used. There are also Pentium II and Celeron processors, which automatically always operate at the proper frequency, regardless of the switch position. As these new processors do not differ externally from the previous processors, we recommend always setting the switches in accordance with the processor. This system board you may use with Pentium II processors with 66 MHz and 100 MHz Front Side Bus or with Celeron processors with 66 MHz Front Side Bus Information on which processors can be used is available from your sales office or the customer service center. Pentium II with 66 MHz Front Side Bus: Processor 300 MHz 333 MHz switch 5 off on switch 6 on off switch 7 off off switch 8 on on Celeron with 66 MHz Front Side Bus: Processor 233 MHz 266 MHz 300 MHz 333 MHz 366 MHz 400 MHz 433 MHz 466 MHz 500 MHz 533 MHz switch 5 off on off on off on off on off on switch 6 off on on off off on on off off on switch 7 on off off off off on on on on off switch 8 on on on on on off off off off off Pentium II with 100 MHz Front Side Bus: Processor 350 MHz 400 MHz 450 MHz switch 5 off on off switch 6 off on on switch 7 on off off switch 8 on on on A26361-D1107-Z180-10-7619 13 Mechanics Pentium III with 100 MHz Front Side Bus: Processor 450 MHz 500 MHz 550 MHz 600 MHz 650 MHz 700 MHz 750 MHz 800 MHz switch 5 off on off on off on off on switch 6 on off off on on off off on switch 7 off off off on on on on off switch 8 on on on off off off off off Functions controlled by the switch block Function Password Skip Off Recovery BIOS Off Floppy write protect Off SW1 PWS on off X X X X SW2 RCV X X on off X X SW3 FWP X X X X on off SW4 AUX X X X X X X i Switch 4 (SW4) is reserved! Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Auxiliary power supply Onboard power supply 1. 8 - 3. 5 V ±5 % Voltage +5. 1 V +12 V -12 V +3. 3 V +5. 0 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % Maximum current 15 A 300 mA 100 mA 4A 50 mA 1A 14 A Comment without Save-to-RAM, Wake On LAN and PCI bus auxiliary power support with Save-to-RAM, Wake On LAN and PCI bus auxiliary power support 14 A26361-D1107-Z180-10-7619 Documentation Power loadability Fuse number 1 Maximum Fuse current 750 mA Function Universal serial bus (USB) Port A Keyboard Mouse Universal serial bus (USB) Port B Maximum function current 500 mA Not specified Not specified 500 mA 2 750 mA Documentation Ê Ê Ê Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START. EXE file in the main directory of the CD. Select your system board or your device. Select - Technical Manuals Select - Technical Manuals (BIOS) i You may have to install the Acrobat Reader - Software on the CD-ROM (path utls/acrobat) before reading! [. . . ] Size: From 16 Mbytes up to 768 Mbytes SDRAM A26361-D1107-Z180-10-7619 15 Troubleshooting Technology: 100 MHz unbuffered DIMM modules. 168 pin, 3. 3V, 100 MHz SDRAM 2M, 4M, 8M, 16M and 32M x 64 bit 2M, 4M, 8M, 16M and 32M x 72 bit (with ECC) For one socket 16, 32, 64, 128 or 256 Mbyte Granularity: * The EEPROM of PC100 modules contains a number of critical timing parameters and data regarding the chip and the module vendor. Due to this the system board will properly recognize the module by reading all important timing parameters specified in the EEPROM via theSerial Presence Detect interface. Troubleshooting Message BIOS update The System BIOS provides optimum support for the processor you have chosen. If the message BIOS update for installed CPU failed appears the microcode required for the processor inserted must still be loaded. [. . . ]