User manual FUJITSU SIEMENS SCENIC PRO M6/D6

[. . . ] Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. [. . . ] Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr. /Order No. : A26361-D1372-Z180-1-7619 Printed in the Federal Republic of Germany AG 1201 12/01 A26361-D1372-Z180-1-7619 System Board D1372 D1371 D1370 Additional Technical Manual December 2001 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2001 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. for the processor) The components and connectors marked are not necessarily present on the system board. 4 - English A26361-D1372-Z180-1-7619 CNR Connectors Connectors ! Some of the following connectors are optional! Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal AC Outlet (high asserted) PS FAN Control (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM (+3, 3V) GND A26361-D1372-Z180-1-7619 English - 5 Connectors Front panel connector Power On/Off 1) Message LED 1) 1) Sleep LED HD-LED Power On LED 1) 2) Reset 1 2 1) SCSI LED Input 1) Sleep 1) Cable is not included in the delivery scope. 2) 2pin or 3pin connector possible 1) The sleep button (optional) functions only for operating systems with APM (not with ACPI). Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 271) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal not connected Key GND not connected Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) 6 - English A26361-D1372-Z180-1-7619 Connectors Intrusion connector for case open detect for optional push-button (opener) Pin 1 2 3 Signal 1 GND Case open (low asserted) Intrusion switch present (low asserted) 12 17 14 USB port C / D 1 - Dual channel (internal or external via special wire) 1 7 Pin 1 Signal VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Data negative Data positive GND Shield GND Pin 7 Signal Shield GND / Over Current Pin 13 Signal Key 2 3 4 5 8 9 10 11 GND Data positive (port D) Data negative (port D) VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 14 15 16 17 GND Data positive (port C) Data negative (port C) VCC Dual (fused max. 500mA and power supervision with over current detection) Key 6 Key 12 18 Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND +12 V Fan sense 1 A26361-D1372-Z180-1-7619 English - 7 Connectors Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Audio front panel (internal) 1 2 Pin 1 3 5 7 9 Signal Analog VCC (5 V) Analog GND Right Audio in Key Left Audio in Pin 2 4 6 8 10 Signal Micro Input Micro Bias Right Line Output future use Left Line Output* CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input 8 - English A26361-D1372-Z180-1-7619 Connectors Fan 1 connector (processor fan - controlled and supervised, only for 3 pin fans) Pin 1 2 3 Signal 1 GND Controlled fan voltage (0 V / 6. . . 12 V) or fix FAN voltage (+12 V) Fan sense Configuration Functions controlled by the configuration switch Switch 1 1 2 2 3 3 4 4 Function Password skip Off Recovery BIOS Off 133 MHz FSB for future Celeron Processors 66 / 100 MHz FSB for Celeron Processors Low auxiliary power supply (<2 A) f/ USB wakeup disabled High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off A26361-D1372-Z180-1-7619 English - 9 Documentation Power Power requirement for onboard components (worst case) Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage -12 V +12 V +5. 0 V +3. 3 V +5. 0 V Maximum variation ±5 % ±10 % ±5 % ±5 % ±5 % Maximum current 350 mA 200 mA 15 A 4A 2A Comment Power loadability Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port VGA connector Universal serial bus (USB) Port A Universal serial bus (USB) Port B Universal serial bus (USB) Port C Universal serial bus (USB) Port D Maximum function current Not specified Not specified Not specified Minimum 50 mA 500 mA 500 mA 500 mA 500 mA 2 3 4 500 mA 500 mA 1250 mA Documentation Ê Ê Ê Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START. EXE file in the main directory of the CD. Select your system board or your device. [. . . ] Select your system board or your device. Select - Technical Manuals Select - Technical Manuals (BIOS) i You may have to install the Acrobat Reader - Software on the CD-ROM (path: utls/acrobat) before reading!For more details please read the according readme. txt files. 10 - English A26361-D1372-Z180-1-7619 Installing drivers Installing drivers Ê Ê Ê Insert the "Drivers & Utilities" CD. [. . . ]