User manual FUJITSU 755TX

[. . . ] COPYRIGHT FujitsuTM PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. LifeBook, Fujitsu, and the Fujitsu logo are trademarks of Fujitsu Limited. [. . . ] (Adapter included with your notebook. ) Lithium ion battery installed in Device Adapter for Multi-function Bay 2. (Adapter included with your notebook. ) Multi-function Bay 1 Release Button To Install a Device in Multi-function Bay 1 4. Orient the item to be installed with the finger ridge away from the body of your notebook and the connector toward the body of your notebook. With the module connector toward the back of your notebook align the grooves on the side of the device with the tracks in the side of the bay. (Figure 4-2. ) s The Lithium ion battery included with your notebook can power your notebook from either bay. Your notebook also supports a dual battery configuration with a Lithium ion battery in both bays at the same time. (The optional second battery must be purchased separately. ) It does not support multiple floppy disk drives, but has three different places to install one. To Install or Remove a Device in Multi-function Bay 1. Close all files and exit all applications. Turn off power to your notebook, close the display and remove the AC adapter. Turn your notebook upside down with the bay openings toward you. 98 Figure 4-2 Removing and Installing a Device in Multi-function Bay 1 6. Slide the module toward the back of your notebook until it clicks into place. To Remove a Device from Multi-function Bay 1 4. Slide the release latch at the right rear corner of Multi-function Bay 1 toward the outer edge of your notebook. Slide the device forward until the unit is clear of the compartment. Use the finger ridge on the bottom of the device. CAUTION Be careful aligning and seating modules in the bay. If the fit is incorrect you may damage the bay or the module. If the module does not move easily, remove it, and check for dirt or foreign objects. It will require a firm push to latch the module in place. LifeBook 7 00 Series fr om Fujitsu User Installable Features Multi-function Bay 2 Release Button To Remove a Device from Multi-function Bay 2 4. Slide the release latch at the left rear corner of Multi-function Bay 2 toward the outer edge of your notebook. Slide the device forward until the unit is clear of the compartment. Use the finger ridge on the bottom of the device. To Install a Device in Multi-function Bay 2 Figure 4-3 Removing and Installing a Device in Multi-function Bay 2 To Install or Remove a Device in Multifunction Bay 2. [. . . ] 2, 8-9, 96, 106, 111, 113 115, 149, 152, 156, 158 RJ-45. 19, 39-40, 43-45, 80, 84-85, 114 Scr Lk Indicator . 3, 108, 148, 151, 154, 164 Second Lithium ion battery . 151, 154, 157, 1, 11-12 51-55, 77-80, 106, 122-123, 133 LifeB ook 70 0 Series from Fuj itsu Index Security Menu . [. . . ]