User manual FUJITSU E350

[. . . ] COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. [. . . ] [Flat-Panel] [Disabled] Selects where the video signal will be routed. Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolution 1024 x 768 (E335, E340 and E350) or 800 x 600 (E330) will still cover the entire screen. 94 LifeBook E Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k E S e r i e s PCI Configuration Submenu The PCI Configuration submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 71. ) Table 4-9 shows the names of the menu fields for the PCI Configuration submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help PCI Configuration v IRQ Reservation Internal Modem: [Enabled] Reserve specific IRQs for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-9 PCI Configuration Submenu 95 Four Section Four Table 4-9 Fields, Options and Defaults for the PCI Configuration Submenu of the Advanced Menu Menu Field Options Default Description IRQ Reservation: Internal Modem: or Internal LAN: Disabled; Enabled. [Enabled] Allows the internal LAN module to be enabled or disabled. -- [Enabled] Accesses a submenu allowing the user to reserve specific IRQs for use by legacy ISA devices. Allows the internal modem module to be enabled or disabled. POINT The BIOS setting for your communication device is variable depending on your LifeBook E Series Built-to-order configuration. 96 LifeBook E Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k E S e r i e s Table 4-10 shows the names of the menu fields for the IRQ Reservation submenu of the PCI Configuration submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-10 IRQ Reservation Submenu 97 Four IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 71. ) Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. Section Four Table 4-10 Fields, Options and Defaults for the IRQ Reservation Submenu of the of the PCI Configuration Submenu of the Advanced Menu Menu Field Options Default Description IRQ 3: Available; Reserved. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table. CAUTION Only IRQ's 9, 10, & 11 can be reserved without conflict. IRQ 4: IRQ 5: IRQ 7: IRQ 9: IRQ 10: IRQ 11: Available; Reserved. Available; Reserved. [Available] [Available] [Available] [Available] [Available] [Available] 98 LifeBook E Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k E S e r i e s DMI Event Logging Submenu of the Advanced Menu The DMI Event Logging Submenu is for setting up the logs DMI event logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 71. ) Table 4-11 shows the names of the menu fields for the DMI Event Logging submenu, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help DMI Event Logging Event log capacity: Event log validity: Space Available Valid Clear all DMI event logs: [No] Event Logging: System Boot Event: [Enabled] [Disabled] 'Yes' clears all DMI event logs at next boot. The value is reset to 'No' after clearing logs. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-11 DMI Event Logging Submenu 99 Four Section Four Table 4-11 Fields, options and Defaults for the DMI Event Logging Submenu Menu Field Event log capacity: Event log validity: Clear all DMI event logs: Options Display only. Default [Space Available] [Valid] [No] A Yes selection causes the event logs to clear at the next boot. Once the logs are cleared this automatically sets to No until reset to yes by selecting yes here. Turns event logging on and off for all DMI events. Turns event logging on and off for DMI system boot events. [. . . ] 4, 49, 135, 143, 170, 172 Index SCSI . 3­4, 120, 141 Second Lithium ion battery . 27, 67­71, 101­106, 139, 154­155, 165 Security Menu. 67, 101, 103­106, 155, 165 Serial port . [. . . ]