User manual FUJITSU N3410

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. [. . . ] Click OK to save the setting and return to the General Settings page. If you are using Cisco CCX, click the Enable Cisco Client eXtentions option to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. Select Open, Shared, WPA, or WPA-PSK in the Network Authentication options. Select either None, WEP, CKIP (if Enable Cisco Client eXtentions is enabled on the General Settings page), or TKIP for the data encryption. If WEP is selected, select either 64 or 128-bit for the Encryption Level. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the 802. 1x Enabled checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. Please contact your network administrator if configuration of this setting is required. After selecting your authentication type, click the Configure button to open the Settings dialog. Enter the user name and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. The "Server Identity" can be use the default setting. The "Client Certificate" should be the one obtained from your RADIUS server or other certification server. Click Close to save the settings. 25. From the General settings page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click the Advanced button to set the network connection preferences. Click the Connect button to connect to the network. Click OK to close the Intel(R) PROSet for Wireless utility CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. [. . . ] USB 2. 0 is backward-compatible with USB 1. 0 devices to allow you to connect older devices to the ports. A video display standard originally introduced by IBM with the PS/2 series of personal computers. A memory dedicated to video display data and control. WEP Wired Equivalent Privacy WEP is an encryption algorithm that is part of the 802. 1x standard. [. . . ]