User manual FUJITSU N3430

[. . . ] N3430-02. book Page 1 Tuesday, May 16, 2006 10:48 AM Copyright Fujitsu LifeBook N3430 Notebook ® User's Guide N3430-02. book Page 2 Tuesday, May 16, 2006 10:48 AM Copyright N3430-02. book Page 3 Tuesday, May 16, 2006 10:48 AM Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. [. . . ] The user name and password do not have to be the same as name and password of your current Windows user login. 3. Configure network settings TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING INTEL PROSET FOR WIRELESS UTILITY This section explains the procedure to properly configure the WLAN device using the Intel PROSet for Wireless utility. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, WPA-PSK Procedure 1. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet for Wireless utility. Click the [Start] button first and then [All Programs]. Click the icon [Intel PROSet Wireless] to execute the Intel PROSet for Wireless utility. 2. 3. 52 N3430-02. book Page 53 Tuesday, May 16, 2006 10:48 AM W I r e l e s s L A N U s e r 's G u i d e 23. From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click the Connect button to connect to the network. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. Processing will return to the [Wireless Network Connection Properties] window. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. 2. Click the [Start] button, then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click the [System] icon. [. . . ] The USB 2. 0 specification is a peripheral bus standard for connecting external devices at up to 480 Mbps. Some features of the standard include support for up to 127 concurrent USB devices, dynamic insertion and removal of devices, and self-identifying peripheral configuration for true plug-and-play functionality. USB 1. 0 connects external devices at up to 11 Mbps. USB 2. 0 is backward-compatible with USB 1. 0 devices to allow you to connect older devices to the ports. [. . . ]