User manual FUJITSU N6410

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. [. . . ] See your device documentation and software documentation to determine the required I/O address. Change the settings in the BIOS setup utility. (See BIOS Setup Utility page 29 for more information) Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. 54 Tr o ub le s ho o ti ng Problem Possible Cause Possible Solutions A card inserted in the PC Card slot does not work or is locking up the system. (continued) The card may have been installed while an application was running, so your notebook is not aware of its installation. You may have the wrong I/O address selected for your PC Card device. Your PC Card device and another device are assigned the same I/O address. Close the application and restart your LifeBook notebook. See your PC Card documentation to determine the required I/O address. (See BIOS Setup Utility page 29 for more information) Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. Power Failures You turn on your LifeBook notebook and nothing seems to happen. The installed primary battery is discharged, there's no second battery installed or there is no AC adapter installed. Check the Status Indicator Panel to determine the presence and condition of the batteries. (See Status Indicator Panel page 15 for more information) Install a charged battery or a Power adapter. Use the Status Indicator panel to verify the presence and condition of the batteries. (See Status Indicator Panel page 15 for more information) If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. The battery or batteries are low. Check the Status Indicator Panel to determine the presence and condition of the batteries. (See Status Indicator Panel page 15 for more information) Use a Power adapter to operate until a battery is charged or install a charged battery. The AC adapter is not plugged in properly. The Power adapter has no power from the AC outlet. Your LifeBook notebook turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. Verify that your adapter is connected correctly. (See Power Sources page 27 for more information) Move the AC cord to different outlet, check for a line switch or tripped circuit breaker for the AC outlet. Press any button or key on the keyboard, or move the mouse. If that fails, push the Power/Suspend/ Resume button. [. . . ] Audio/Video Input Connection S-Video Cable Connection Connecting Audio/Video Inputs The following external devices can be connected to the notebook to work with Media Center Edition: · Image devices such as video players and video cameras. These can be connected either with composite cables or S-Video cables. · Audio sources can be connected via the video audio input jack on the notebook. You can transfer audio and video from an external device such as an external VHS or DVD player by connecting it to your notebook. [. . . ]