User manual FUJITSU P5010D

[. . . ] Copyright Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. [. . . ] The window [My Network Places] will be displayed. Click [View workgroup computers] under Network Tasks in the left frame. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in "Setting the file-sharing function" on page 58 will be displayed. Double-click the folder to be accessed. If connection cannot be made to the network or if you want to check for normal connection, see "Troubleshooting" on page 68. Right-click the Broadcom icon in the lower right corner of the screen. The Broadcom Wireless Configuration Utility window opens. The current radio condition is displayed. (When the radio is turned off or the computer is not yet connected, some of the conditions are not displayed. ) 5. 59 LifeBook P5000 Notebook Section Five Status The connection condition is shown. Network Name (SSID) The connected network name (SSID) is displayed. AP's MAC Address In infrastructure mode, the MAC address of the access point currently in connection is shown. In Ad Hoc mode, a value is shown, but it is not the MAC address of the connected client. WEP When the Network key is used, this appears as [Enabled]. Speed The current communications speed is displayed in Mbps. Channel The channel number currently being used for the communications is displayed. Client IP Address The IP address is shown. Network Connection Type [Infrastructure] or [Ad Hoc] is displayed. Radio State When radio waves are being transmitted, [Enabled] appears. Signal The longer the bar graph, the better the radio wave signal. Noise The shorter the bar graph, the less noise, resulting in a better the radio wave signal. 60 W I r e l e s s L A N U s e r 's G u id e Connection using Windows 2000 FLOW OF OPERATIONS The wireless LAN connection procedure is outlined below. Make sure that the personal computer is ready for the transmission of radio waves from the wireless LAN. For further details, see "Starting the transmission" on page 54. [. . . ] USB 2. 0 is much faster, transferring at up to 480Mb/s. USB 2. 0 is backwardcompatible to work with USB 1. 1 devices. VGA Video Graphics Array. A video display standard originally introduced by IBM with the PS/2 series of personal computers. A memory dedicated to video display data and control. [. . . ]