User manual FUJITSU SP-1130

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FUJITSU SP-1130. We hope that this FUJITSU SP-1130 user guide will be useful to you.

Lastmanuals help download the user guide FUJITSU SP-1130.


Mode d'emploi FUJITSU SP-1130
Download
Manual abstract: user guide FUJITSU SP-1130

Detailed instructions for use are in the User's Guide.

[. . . ] P3PC-5332-01ENZ0 SP-1120/SP-1125/SP-1130 Explains the names and functions of parts and basic scanner operation. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Operator's Guide Thank you for purchasing our Color Image Scanner SP Series. This manual explains about the basic operations and handling of the scanner. For details about scanner installation and connections, refer to the Quick Installation Sheet. [. . . ] Make sure that it is cleaned properly because residue on the roller will affect the feeding performance. Be careful not to have your fingers caught when the ADF closes. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings CAUTION ATTENTION Check that the ADF is closed properly. Otherwise, the document may not be fed into the ADF. Appendix Glossary 56 Chapter 6 Replacing the Consumables This chapter explains how to replace the consumables for the scanner. The inside of the ADF becomes very hot when the scanner is being used. Before you replace the consumables, make sure to turn off the power, unplug the power cable and wait at least 15 minutes for the ADF glass to cool down. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings CAUTION 6. 1 Consumables and Replacement Cycles The following table shows the consumables used for the scanner. name ROLLER SET  Brake roller Part No. PA037080001 Suggested Replacement Cycle 100, 000 sheets or one year TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables for replacement before it reaches the end of its life. The scanner records the number of sheets scanned after replacing the consumables, which allows you to check the status of the consumables. Note that the suggested replacement cycles are references for using A4 (80 g/m2 (20 lb) wood-free or wood-containing paper, as these cycles vary depending on the type of documents scanned and how often the scanner is used and cleaned.  Pick roller HINT Only use the specified consumables. To purchase the consumables, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. appendix Glossary 58 Chapter 6 Replacing the Consumables 6. 2 Replacing the Roller Set The roller set consists of a brake roller and a pick roller. Replace each roller in the following procedure. 2 Pull out the left side of the brake roller shaft, and then pull out the right side of the shaft from the hole. TOP Contents Index Introduction Brake roller shaft Brake roller 2 How to Use the Operator Panel 1 Various Ways to Scan Daily Care Replacing the Consumables Scanner Overview How to Load Documents 1 2 Remove all documents from the ADF paper chute (feeder). Be careful not to have your fingers caught when the ADF closes. [. . . ] Pick roller A roller which picks up one sheet off of documents loaded in the ADF paper chute (feeder), and feeds the document into the ADF. Pick start time A time period for a loaded document from the point of passing the hopper empty sensor to being picked. pixel The dots that make up a scanned image. Portrait Orientation in which the long side of the document is set parallel to the feed direction. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FUJITSU SP-1130

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FUJITSU SP-1130 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag