User manual FUNAI 7100

[. . . ] . 12 12 12 13 14 15 16 17 17 17 18 DVD Functions Playback . Track Search / Title/Chapter Search / Time Search . Repeat / Random / Programmed Playback . Repeat Playback / Repeat A-B Playback / Random Playback / Programmed Playback. [. . . ] Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). Select the "L1"or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or L [CHANNEL K/L]. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or L [CHANNEL K/L]. 5) Press [RECORD] on the recording unit. 6) Begin playback of the tape in another source. A 7) To stop recording, press [STOP/EJECT C/A] on the recording unit, then stop playback of the tape in another source. Hint · For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. · Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. · You can use a video disc player, satellite receiver or other audio/video component with A/V outputs. · The resume information stays on even when the power is turned off. Zoom DVD DVD-V Paused and Step-by-Step Playback DVD 1) Press [ZOOM] during playback. 2) Press [ZOOM] repeatedly to select the required zoom factor: x2, x4 or OFF. x2 x4 DVD-V CD Press [PAUSE k] during playback. To continue playback, press [PLAY B]. DVD-V The disc goes forward by one frame each time [PAUSE k] is pressed during the pause mode. To continue playback, press [PLAY B]. 3) Press [K / L / s / B] to slide the zoomed picture across the screen. 4) To exit zoom mode, press [ZOOM] to select OFF. Hint · Zooming function does not work while the disc menu is showing up. · x4 zoom is not available on some discs. · The picture may be distorted when you press [PAUSE k] or [h] repeatedly in the zoom mode. · It may take several seconds to slide the zoomed picture. Hint · On DVDs, set "STILL MODE" to "FIELD" in the Display menu if pictures in the pause mode are blurred. (Refer to pages 20-21. ) ­ 15 ­ EN DVD Functions Slow Forward/Slow Reverse On-Screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. DVD DVD DVD-V DISPLAY CD DISPLAY Angle icon, appears only when available on the DVD Current playback status Remaining time of the current chapter Current playback status 1 4/12 0:03:21 - 0:02:15 T 1 11/16 0:00:00 - 0:03:30 DISPLAY Elapsed time of the current chapter DISPLAY CH(Chapter): Current chapter number / Total chapters 2 4/12 0:13:45 - 0:45:40 T Remaining time of the current track Elapsed time of the current track TR(Track): Current track number / Total tracks ALL: Current track number / Total tracks Current repeat setting appears only when the repeat setting is active T: Track repeat A: All Tracks repeat A B: A-B repeat Remaining time of the entire disc Elapsed time of the entire disc 2 1/3 0:00:00 - 1:23:45 Remaining time of the current title Elapsed time of the current title TT(Title): Current title number / Total titles DISPLAY DISPLAY 3 Hint · When you are playing a disc in PROGRAM or RANDOM mode, PROGRAM (or RANDOM) will be displayed instead of 2 . 3 T L1 Layer numbers, appears only when playing a two-layered Disc L0: Layer 0 is playing L1: Layer 1 is playing Current repeat setting appears only when the repeat setting is active C: Chapter repeat / T: Title repeat / A B: A-B repeat DISPLAY BIT RATE: The amount of audio and video data currently being read 4 DVD Functions ­ 16 ­ EN Search Function Track Search DVD Title / Chapter Search DVD Time Search DVD CD DVD-V DVD-V CD Using [SEARCH MODE] 1 SEARCH MODE Using [SEARCH MODE] 1 PLAY /12 1 PLAY TOTAL 1:29:00 /29 SEARCH MODE 2 1 4 7 2 5 8 0 3 6 9 +10 /29 SEARCH MODE Press once for the Chapter Search. Press twice for the Title Search. 3 6 9 +10 /12 Press repeatedly until the Time Search display appears. 3 6 9 TOTAL 1:29:00 2 1 4 2 5 8 0 Within 30 seconds 2 1 4 2 5 8 0 7 · For the disc with less than 10 tracks, press the track number directly. · For discs with more than 10 but less than 99 tracks, to play a single-digit track, press [0] first, then the track number (e. g. [. . . ] · To open or close the disc tray. · To advance playback one frame at a time. · To arrange the playing order or play randomly. · To set virtual surround on/off. [. . . ]