User manual FUNAI EWD7002

[. . . ] OWNER'S MANUAL DVD PLAYER EWD7002 INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 256-2487 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] ¡Perform the title search and the TT : 1/ 2 CH __ / 49 SLOW MOTION DVD 1 Press the FWD g button while playback is paused. (Sound remains muted. ) ¡Slow motion mode will be activated. ¡Pressing the FWD g button cycles the playback speed in three steps. Select an appropriate speed while referring to the speed indication on the screen. FWD D Button ×1/16 chapter search after setting them on the same screen at the same time. ¡During playback, press the numeric buttons to select a Chapter. The Chapter will be located and playback will start. ¡When playback is stopped, press the numeric buttons to select a Title. The Title will be located and playback will start. Notes TT : _/ 12 CH : 12/ 49 ×1/8 ¡Playback from a desired title or chapter is not avail- able with some DVDs. ×1/2 ¡Some discs which the chapter number isn't dis- played cannot playback from a desired chapter. TRICKS WITH THE SKIP BUTTONS (H, G) 2 Press the PLAY button to return to normal playback speed. Notes ¡Slow playback is not available with audio CDs. ¡The reverse of slow playback is not available. If the SKIP button G is pressed during playback or while playback is paused, the current chapter will be skipped and the next chapter will be played. When the SKIP button H is pressed once, the top of the current chapter will be located for replaying. When the SKIP button H is pressed again within 2-seconds after playback begins, the previous chapter will be located. EN 1L25 ­ 15 ­ STARTING FROM A DESIRED TIME COUNT DVD CD 1 Press the SEARCH MODE button twice. 2 Press the numeric buttons to set the desired time count. ¡Example: 1 hour, 23 minutes and TIME 1:23:30 TOTAL 1:29:00 RANDOM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program setting menu screen will appear. 2 Press the MODE button again. RANDOM 30 seconds 12330 START : PLAY EXIT : MODE Notes ¡In the case of DVD, Time Search in Title is effective. Random playback (But Time Search in Chapter is ineffective. ) will then start. ¡In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective. ) Note ¡Playback from a desired time count is not available ¡Program playback is not available during random with some discs or if the unit is in stop mode. ¡If wrong numbers are entered, press the CLEAR button and re-enter the correct numbers. MARKER DVD You can define the part to be called back. CD 1 Press the SEARCH MODE button three times during playback. Set the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number shown as "NOT SET". Press the ENTER button when the screen to be reviewed appears. Up to 5 points can be marked. 1 2 3 4 5 AC NOT SET Call back the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be called back and press the ENTER button. Clear the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be cleared and press the CLEAR button. [. . . ] Para hacer las conexiones de audio utilice cables digitales coaxiales de audio (de venta en el comercio). Consulte la figura 4 de la página 11 REPRODUCCIÓN DE UN DISCO REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO DVD Para empezar Conecte la alimentación del televisor, amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto. ) 3 Ponga un disco en la bandeja. ¡Asegúrese de que el disco esté correctamente asen- CD tado en el hueco correcto, con el lado de la etiqueta hacia arriba. 4 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará desde el primer capítulo o pista del disco. [. . . ]