User manual FUNAI MWD2206A

[. . . ] Please read before using this unit. Owner's Manual DVD/CD Player with Video Cassette Recorder MWD2206A INSTRUCCIONES EN ESPAÑOL INCLUIDAS. RF cable (WPZ0901TM002) Remote control (NB179UD) with two AA batteries TOLL FREE : 1-800-605-8610 or visit our web site at http://www. funai-corp. com Owner's Manual Precautions Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Location and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Avoid the Hazards of Electrical Shock and Fire . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · TIMER REC indicator on the front panel flashes if there are no more Timer Recordings on standby. · If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording. If you want to use the DVD player during a Timer Recording or while TIMER REC indicator on the front panel is on or blinking. · Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. NOTE (for Timer Recording) : · If there is a power failure or the unit is unplugged for more than 0 seconds, clock and all timer settings will be lost. ­ 1 ­ EN VCR Functions PROGRAM NUMBER 1 DATE 1 0 / 2 MON START TIME 0 7 : 0 PM END TIME 0 8 : 0 PM CHANNEL 16 REC SPEED SP B SP SLP 1) Press [SUBTITLE/T-SET] then, [VCR] on the remote control. ) Select "TIMER PROGRAMMING" by using [K/L], then press [B]. 4) Select the program number which you want to check by using [K/L]. The details of the program you selected will appear on the TV screen. · Go to the digit you want to change by using [s/B]. Then, enter correct numbers by using [K/L]. · You may cancel the entire program by pressing [s] while the program number blinks. 6) Press [SUBTITLE/T-SET] to return to timer standby mode. Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) (Back of another source) or DVD/VCR COMPONENT VIDEO OUT (Back of DVD/VCR*) VCR AUDIO OUT AUDIO OUT L AUDIO IN Y CB CR R VIDEO OUT VIDEO VIDEO OUT IN Connect ANT-OUT 1 ANT-IN DIGITAL AUDIO OUT DVD AUDIO S-VIDEO OUT OUT DVD/VCR COMPONENT VIDEO OUT VCR AUDIO OUT Y CB L AUDIO IN ANT-IN L R VIDEO OUT Connect RF cable (supplied) 2 COAXIAL R CR VIDEO IN ANT-OUT (commercially available) Audio/Video cables *Front input jacks are also available 7) To stop recording, press [STOP/EJECT C A] on the recording unit, then stop playback of the tape in another source. 1) Insert a pre-recorded tape into another VCR for playing. 2) Insert a tape with its record tab into this unit for recording. ) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L] on this unit. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L] on this unit. 5) Press [RECORD] on the recording unit. 6) Begin playback of the tape in another source. Hint · For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. · Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. [. . . ] · To open or close the disc tray. · To eject the video cassette from the VCR. · To pause tape playback or recording. · To advance playback one frame at a time. [. . . ]