User manual FURUNO BR-2000 OPERATORS MANUAL

[. . . ] 10 2. 2. 2. 2 Detailed alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. 2. 3 Alarm types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. 2. 3. 1 Event alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. 2. 3. 2 State alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 5) 3) Local Alarm: This page is prepared for the navigation equipments, which have no own visual display. (Track pilot, Autopilot) The alarms generated in the AMWSS itself are also displayed on this page. (See Fig. 6. ) Alarms are displayed and processed in different priorities for the identification of alarm importance. Priorities are as followings: Emergency alarms - alarms which indicate that immediate danger to human life, or to the ship and its machinery exists and that immediate action must be taken. Distress, urgency and safety alarms - alarms, which indicate that a caller is in distress or has an urgent message to transmit. Primary alarms - alarms, which indicate a condition that requires, prompt attention to prevent an emergency condition. Secondary alarms - all other alarms. Each alarm is associated with coloured marker showing into which priority the alarm belongs. Emergency alarms ­ red marker Distress, urgency and safety alarms ­ yellow marker Primary alarms ­ white marker surrounded by red stripe Secondary alarms ­ red marker surrounded by white stripe The latest five active alarms are displayed in the alarm list in the lower right corner of the display. The rest of the active alarms are displayed on alarm pages. Alarms in the active alarm list are shown in order of priority and occurrence. Non-acknowledged alarms are indicated with a flashing red text and marker and buzzer. Acknowledged but pending alarms are distinguished from other alarms by steady non-flashing yellow alarm text on alarm page. Pending navigation alarm, means that there is at least one pending alarm on alarm page. Fig. 6 Local Alarm 2. 1. 3 Function page Function page is used to set some operation and installation parameters. Alarm History Selection of Back-up navigator* Installation parameters** Selection of over-head panel display presentation (optional feature) *: not accessible to other persons than captain or other authorized person. See the leaflet "HOW TO SELECT BACK-UP NAVIGATOR". **: not accessible to other persons than service engineers. See the leaflet "INSTALLATION PARAMETER SETTING" How to print out the History Alarm: 1 Press the FUNC SET key. A menu window will appear on the screen. The menu contains a cursor (blue triangle) and three items. 2 Move the cursor to the "Alarm History" position with the MOVE UP and MOVE DOWN keys, and press the ENTER­key. The printer, connected to the display control computer print a alarm log table. [. . . ] A menu window will appear on the screen. The menu contains a cursor (blue triangle) and three items. a). 2) Press the keys in the following manner. b). EXTERNAL ALARM LOCAL ALARM HARBOUR CONNING 3) Move the cursor to the "Backup Officer" position with the MOVE UP and MOVE DOWN keys, and press the ENTER­key. [. . . ]