User manual FURUNO CSH-24 OPERATORS MANUAL

[. . . ] COLOR SCANNING SONAR MODEL CSH-23/24 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : Telefax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : NOV. OME-13040 ( DAMI ) CSH-23/24 *00080805900* *00080805900* *00080805900* *OME13040E00* *OME13040E00* *OME13040E00* SAFETY INSTRUCTIONS WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel should work inside the equipment. [. . . ] To cancel change and close the menu, press END key. (Continued on next page) 5-9 Menu NET SHOOT PLAN Item Net Diameter Description Sets estimated ship's turn diameter necessary for shooting net, to get accurate depiction of net location mark, which you can display by pressing the NET COURSE key. The setting range is 200 to 1000 meters in 10 meter steps. Choose ON to interlock diameter of net location mark with tilt angle. When you lower the tilt angle the on-screen net location mark enlarges. (For example, the net diameter is set for R meters. When the tilt angle is 45° the diameter of the on-screen net is 2 R meters. ) Sets number of net sonde transmitters and their distances between each other. The setting range is 500 to 3000 meters in 100 meter steps. Sets wire length between own ship and net. The setting range is 100 to 1000 meters in 100 meter steps. The movement of the net during net shooting is plotted by using water current speed and direction fed from external sensor. The external sensor feeds that data for three depths (layers), thus net movement will be different at each layer. Determine degree of difference among layers considering net, sea conditions, vessel construction, etc. If 50% is set, for example, on-screen net moves at speed of 50% of water current speed. Tilt Interlock NET SONDE Net Sonde XMTR Net Length Wire Length Net Width NET PLOT CORR Layer 1 Layer 2 Layer 3 5-10 INIT SET/TEST Menu Description The INIT SET/TEST menu can be display by pressing MENU and ON together. Menu HEADING ADJ Item Heading Adjust Description Sets deviation angle of HEAD mark on hull unit from ship's bow. If deviation is 15° to port, enter "15" (degrees); 15° to starboard, enter "345. " Set data transmission speed (baud) of ports. Set to 2400 bps for I/F CS-120A. BAUD RATE I/F CS-120A Aux Port 1 Aux Port 2 Aux Port 3 NMEA Ext KP Polarity KP Out Polarity Depth Dist for Shoot Temperature Language EXT KP Choose positive or negative logic for keying pulse fed from external sonar or echo sounder, to synchronize transmission. Chooses unit of distance run readout for shooting net; meters, feet, fathoms, or passi. Chooses unit of water temperature readout; centigrade or fahrenheit. Chooses language used in menu; English, Japanese, or Korean. Performs display unit self test continuously. Checks the keys of the display unit and remote control box for proper operation. Checks for screen distortion with gray test. Conducts communication test between the display unit and transceiver unit. [. . . ] 4-3 HOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Horizontal slice Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 T Target Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Target Lock Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]