User manual FURUNO FAX-30 OPERATORS MANUAL

[. . . ] FACSIMILE RECEIVER FAX-30 C Your Local Agent/Dealer 9-52, Ashihara -cho, Nishinomiya, Japan Telephone: Telefax: 0 7 9 8 - 6 5 - 2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION D1 : : A U G. O M E -6 2 6 0 0 (DAMI) F A X- 3 0 SAFETY INSTRUCTIONS Safety Instructions for the Operator WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. [. . . ] Then, the FAX-30 will receive facsimile broadcasts according to the timer schedule. Facsimile images are received line by line, taking 30-40 minutes to receive depending on the size of the image and drum rotation speed at the facsimile station. After a facsimile image is received it is compressed and stored in the image memory and then posted on the facsimile standby display screen. This process takes 3-5 minutes. 3. 2. 3 Turning on/off specific timer programs 1. At the facsimile standby display, click TIMER SETUP. Click the center column of the program no. Click "<back" or Back button to return to the top menu. 3. 2. 4 Clearing all timer programs You may clear all timer programs as follows: 1. At the facsimile standby display, click TIMER SETUP. Click CLEAR ALL at the top of the screen. You are asked "Are you sure to clear all?" Click Yes to reset; Cancel to escape. Click "<back" or Back button to return to the top menu. 3-4 3. FAX OPERATION: PC 3. 3 Displaying Facsimile Images 1. Thumbnails of images received are shown on the display. The equipment stores as many as 12 images, on two pages. When the image storage capacity is exceeded, the oldest image is automatically deleted to make room for the latest. 100N 3625. kHz IOCXX10 XXXrpm SS=XXX SN=XX STBY NEXT PAGE 1/2 JMH JUN/04 02:46 MENU CHANNEL SETUP TIMER SETUP JMH JUN/05 01:29 JMH JUN/05 01:32 Click NEXT PAGE to go to next page. Receive data Station, date and time image received EDIT STATION LIST SYSTEM SETUP RX MODE << Top JMH JUN/05 03:46 JMH JUN/05 04:29 JMH JUN/05 05:21 Facsimile standby display 2. Click desired image. Click to return to thumbnails display. 100N 3625. kHz IOCXX10 XXXrpm SS=XXX SN=XX STBY <<THUMBNAILS ZOOM IN PHASE ROTATE CW SYNC ROTATE CCW NOISE REJECT LOCK COLOR ERASE REVERSE IMAGE MENU CHANNEL SETUP TIMER SETUP EDIT STATION LIST SYSTEM SETUP RX MODE 102N JMH 7305. 0kHz IOC576 120rpm JUN/05 01:26 0 10 20 30 40 Image processing functions Click to execute. 3. 4. 1. << Top Image data 102N: JMH: 7305. 0 kHz: IOC576: 120 rpm: JUN/05: 01:26: Zone Station Channel Index of Cooperation Drum speed at fax station Date received Time received Facsimile image Note: If the FAX-30 is not accessed from the PC after it has been turned on, time data is not sent to the FAX-30. The timer recording feature may receive a facsimile image using incorrect time data, however the image may not be correctly stored. 3-5 3. FAX OPERATION: PC 3. 4 3. 4. 1 Processing Facsimile Images Phase mismatch When the FAX-30 starts receiving a broadcast already in progress, or noise prevents detection of the phasing signal, the image may be divided into two parts by a thick black (or white) stripe called a dead sector. This phenomenon is due to phase mismatching. When this occurs, correct phase mismatching, after the facsimile has been received. 0 10 20 30 40 Dead sector (can be white) Dead sector center at "15" Example of phase mismatching 1. [. . . ] 2-11 TIMER soft key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 P Phase NavNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 PHASE soft key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 PROG LIST soft key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 R RCV NAVTEX soft key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]