User manual FURUNO FEA-2100 OPERATORS MANUAL

[. . . ] Place the cursor on the [Close] button and press the [SELECT] key to close the windows. Check box 2. Loading the catalogue chart to be updated from CD-ROM to ECDIS 1. Press the [CHART PLAN] key to display the menu. Place the cursor on [Load] and [by CD Catalogue], and press the [SELECT] key to display the [Load CD Catalogue] window. [by CD Catalogue] [Load] 4. [. . . ] Using the [ZOOM IN], [ZOOM OUT] or [SET CHART CENTER] key, adjust the catalogue chart scale so that you can see all charts desired. 4 6. Set the chart group to update as follows. Place the cursor on the [Groups] button at the bottom of the [Catalogue] window and press the [SELECT] key. [Groups] button [Catalogue] window b. Place the cursor on the [New] button and press the [SELECT] key. [NEW] button c. Place the cursor on an alphbet or number button and press the [SELECT] key. Place the cursor on the [OK] button and press the [SELECT] key. Enter group name. [OK] button 5 e. f. Place the cursor on the [Add Frame] button and press the [SELECT] key. Rotate the trackball to place the cursor inside the chart cell frame desired and press the [SELECT] key. Repeat this to select all desired areas. The selected areas are shown in blue. [Add Frame] button g. After selecting all areas desired, place the cursor on the [DONE] button and press the [SELECT] key. [Done] button [Group] window [Save] button [Inside] [Close] button h. Confirm that the chart numbers selected are shown in the [Inside] box in the [Group] window and then place the cursor on the [Save] button and press the [SELECT] key. Place the cursor on the [Close] button and press the [SELECT] key to close the [Group] window. 6 4. Chart Conversion (from ENC format to SENC format) The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to display it on the ECDIS. Note that the conversion takes several hours. Press the [CHART PLAN] key to display the menu. Place the cursor on [Load] - [View loaded CD Catalogue] and press the [SELECT] key. [Load] [View loaded CD Catalogue] [Group Select] window [CD] box 3. Choose the catalogue name from the [CD] box. Place the cursor on the [Groups] button in the [Chart Selection] window and press the [SELECT] key. Place the cursor on the catalogue name entered at the [Group Select] window and press the [SELECT] key. [. . . ] After the conversion has been completed, the chart numbers disappear from the window. Further the color of a chart cell frame changes to green when conversion of the cell is completed. The conversion may take 4 - 5 hours, depending on the quantity of chart numbers [SENC CONVERT] window installed. 9 The error message may appear during conversion, however leave the message displayed until the conversion is completed. [Error] The list in the [Conversion List] becomes blank after conversion is completed. Place the cursor on the [Close] button of the [SENC CONVERT], [Failed SENC conversions] and [Catalogue] and press the [SELECT] key to close the windows. [. . . ]