User manual FURUNO GP-1850D

[. . . ] Back COLOR DGPS/PLOTTER COLOR GPS/PLOTTER GP-1850D, GP-1850 FURUNO/NAVIONICS GP-1850D, GP-1850 FURUNO/C-MAP NT C Yo u r L o c a l A g e n t / D e a l e r 9-52, Ashihara-cho, Nishinomiya, Japan Te l e p h o n e : Te l e f a x : 0 7 9 8 - 6 5 - 2 111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION N : : FEB. OME-43952 (YOSH) GP-1850/1850D SAFETY INSTRUCTIONS WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Only qualified personnel should work inside the equipment. [. . . ] A light-blue line connects between own ship and destination, marked "QP<01>", and it shows the shortest course to the destination. Arrows on the line show the direction to follow to the quick point. Range and bearing from own ship to the destination appears at the top of screen. This location is saved to the waypoint list as waypoint "QP01. " Selecting quick point entry method You need to tell your unit how to set the quick point: 1 POINT, 35 POINT (up to 35 points) or WPT/PORT SERV. (For WPT/PORT SERV, see the next page. ) 1. Select SET GO TO METHOD and press the soft key EDIT. The following display appears. SET GO TO METHOD Navigating to multiple quick points 1. Select 35 POINT in the "selecting quick point entry method, " and return to the plotter display. Place the cursor on an existing waypoint (soft key SELECT WPT appears) or a new location (soft key ADD QP appears). Depending on the selection you made at step 3 press the soft key SELECT WPT or ADD QP. "QP<01>" appears at the cursor location. To erase last-entered waypoint press the soft key ERASE LST WPT. Press the [ENTER] key to register the route. A light-blue line connects between own ship and all quick points, and it shows the shortest course to destination. Arrows on the line show the direction to follow the route. Quick points are numbered in sequential order from QP<01> and are saved to the waypoint list. Range and bearing from own ship to the first destination appears at the top of screen. The unit saves the points as a route, under the name "Q>RTE" (Quick Route). v ' 1 POINT TM 35 POINT TM WPT/PORT SER w Figure 7-1 Set go to method window 4. Press the soft key RETURN to finish. Navigating to a single quick point 1. Select 1 POINT in the "selecting quick point entry method, " and return to the plotter display. Place the cursor on an existing waypoint (soft key GO TO WPT appears) or a new location (soft key GO TO CURSOR appears). 7-1 7. 2 Navigating to Waypoints (waypoint list) + 40°45. 971'N 13°57. 462'E FROM OS 0. 26 nm 180. 2° GO TO QUICK ROUTE NEAR SRVICE PUNTA CORNACCHIA ACCO AMENO ISCHIA PORTO 1. Press the [WPT/RTE] key to open the waypoint & route menu. [. . . ] West Malaysia & Singapore Mascarene Is. Salvage Islands Eritrea (Ethiopia) Morocco Midway Is. (0man) United Arab Emirates Saudi Arabia Namibia Trinidad & Tobago Western United States Eastern United States Alaska Bahamas (excl. San Salvador Is. ) Bahamas, San Salvador Is. [. . . ]