User manual FURUNO GP-7000F

[. . . ] Back COLOR GPS/PLOTTER/SOUNDER GP-7000F The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : Fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : AUG. OME-44291 ( HIMA ) GP-7000F *00014913711* *00014913711* *00014913711* *OME44291B40* *OME44291B40* *OME44291B40* IMPORTANT NOTICE No part of this manual may be copied or reproduced without written permission. If this manual is lost or worn, contact your dealer. The contents of this manual and equipment specifications are subject to change without notice. [. . . ] Also, range and bearing from own ship's position to waypoint appear in the data window. Press the cursor pad to place the cursor at a location not occupied by waypoint. Press the [TLL/GOTO] key to show the GOTO window. CURSOR POSITION ROUTE WAYPOINT GOTO window 3. Rotate the [ENTER] knob to choose WAYPOINT and then push the [ENTER] knob. The SELECT NAME window appears. SELECT NAME 0 0 0 1 WP SELECT NAME window (for waypoints) 4. Enter the waypoint name you want to set as destination. Selecting waypoint through WAYPOINT LIST 1. Press the [MENU] key to show the menu bar. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER] knob. Rotate the [ENTER] knob to choose WAYPOINTS and then push the [ENTER] knob to show the WAYPOINT LIST. Press the cursor pad () to choose the waypoint which you want to set as destination. NAVIGATION 6. 3 Following a Route You can follow a route as follows. Setting a complete route as destination This method enables you to navigate from the first waypoint of a route. Press the cursor pad to place the cursor at the location not occupied by waypoint. Press the [TLL/GOTO] key to show the GO TO window. Rotate the [ENTER] knob to choose ROUTE and then push the [ENTER] knob to show the SELECT ROUTE window. SELECT ROUTE ROUTE NAME 1 2 3 4 5 6 7 8 9 10 0001RT 0002RT 0003RT __________ __________ __________ __________ __________ __________ __________ Select route window 4. Rotate the [ENTER] knob to choose a route which you want to set as destination. Setting part of a route as destination You can start the route navigation from any waypoint in a route. Press the cursor pad () to choose the route desired. Rotate the [ENTER] knob to choose PLOT at the bottom of the screen, and then push the [ENTER] knob. Press the cursor pad to place the cursor on any waypoint which is part of the route you want to set as destination. A line runs between destination selected and own ship's position. [. . . ] Press the [POWER/BRILL] key to turn the power off. 11. 8 GPS Cold Start Cold start clears the Almanac (stored in the memory) to receive the latest Almanac from the GPS satellites. When the equipment has not been used for a long time (over one year), execute cold start as shown below to receive the latest Almanac. Choose ADVANCED from the menu bar, and then push the [ENTER] knob to show the ADVANCED menu. Rotate the [ENTER] knob to choose INPUT/OUTPUT, and then push the [ENTER] knob. [. . . ]