User manual GAGGENAU DI460111

[. . . ] Gaggenau Operating instructions Dishwasher DI 460 DI 461 9000 407 108 (8811) en en Index 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 7 7 7 8 8 8 8 8 8 8 8 9 9 9 9 10 10 10 11 12 12 12 13 13 13 13 13 13 13 Washing the dishes . 13 13 13 13 14 14 14 14 14 15 15 15 15 15 15 16 16 16 16 17 17 17 17 17 18 18 19 19 19 20 20 20 20 20 20 21 21 21 21 21 Safety instructions . Switching off salt refill indicator/ water softening system . Switching off rinse-aid refill indicator . [. . . ] Hold down programme button A and press START is button 10 until on the digital display indicated. The LED for button A flashes and the digital . display displays the factory setting Press programme button A until the factory set value is indicated on the digital display . To change the setting, press programme button C . Each time the button is pressed, the set value increases by one level; when the value of has (off). been reached, the display jumps back to Press START button 10 , the set value is saved. Close the door. Display window Apart from information on the programme sequence, the display window 12 also indicates additional information on e. g. If you would no longer like to have this additional information displayed, proceed as follows. Hold down programme button A and press START is button 10 until on the digital display indicated. The LED for button A flashes and the digital . display displays the factory setting Press programme button A until the factory set is indicated on the digital display 3 . value To change the setting, By pressing the C button, you can switch the onboard computer (additional programme information) off or on . Close the door. 14 Switching off the appliance Short time after the end of the programme: Open the door. Turn off the tap (not applicable if Aqua-Stop fitted). Remove the utensils when they have cooled down. Intensive drying The final rinse uses a higher temperature which improves the drying result. (Caution if utensils are delicate!) Open the door. Hold down programme button A and press START is button 10 until on the digital display indicated. The LED for button A flashes and the digital . display displays the factory setting Press programme button A until the factory set is indicated on the digital display 3 . value To change the setting, Press the button C to switch intensive drying on or off . Close the door. Warning At the end of the programme please open the door fully and not partially when emptying the dishwasher. Any escaping water vapour could damage sensitive worktops. Interrupting the programme Open the door. [. . . ] Select programme with the highest temperature. The expected programme duration is indicated on the numerical display 3 . Press the START button 10 until on the digital display is indicated . The numerical display indicates Switch off appliance 1 and turn off the tap. [. . . ]