User manual GAGGENAU DI461131

[. . . ] *DJJHQDX 2SHUDWLQJ LQVWUXFWLRQV 'LVKZDVKHU DI 460 DI 461 9000 545 909 (9009) 5HLQLJHQ IHUWLJ LQ 6WG $%& 5HVHW VHF en Table of contents Intensive zone Extra drying Energy Save Washing the dishes Programme data Aqua sensor Zeolith drying Switching on the appliance Remaining running time display Display window Timer programming End of programme Automatic switch off / interior light Switching off the appliance Interrupting the programme Terminating the programme Changing the programme Intensive drying Maintenance and care Overall condition of the machine Special salt and rinse aid Filters Spray arms Troubleshooting Setting amount of rinse aid Switching off rinse aid refill indicator Utensils Not suitable Glass and utensil damage Loading the dishwasher Unloading the dishwasher Cups and glasses Pans Cutlery basket Folding spikes Small accessories holder Knife shelf Detergent Adding detergent Combination detergent Overview of programmes Programme selection Information for test institutes Additional options Turbo Half load Hygiene 9 9 10 10 10 10 10 10 10 11 11 11 11 13 13 14 15 15 15 16 16 16 16 Waste water pump . . . on the utensils Customer service Installation Safety instructions Delivery Technical specifications Installation Waste-water connection Fresh water connection Warm water connection Electrical connection Removing the appliance Transportation Protection against frost (Emptying the appliance) Waste disposal Packaging Old appliances 16 16 16 16 16 16 16 17 17 17 17 17 18 18 18 18 19 19 19 19 19 20 20 21 21 21 22 22 22 23 24 24 24 25 25 25 25 25 26 26 26 27 27 27 27 27 Safety instructions Delivery Installation In daily use Children in the household Door lock Damage Disposal Getting to know your appliance Control panel Appliance interior Overview of menu Selecting language Water softening system Setting Water hardness table Special salt $ Using special salt Detergents with salt component Switching off water softening system Rinse aid % 4 4 4 4 4 4 5 5 5 5 5 6 6 7 7 7 8 8 8 8 9 3 Safety instructions ã=Warning Knives and other utensils with sharp points must be placed in the cutlery basket with the points downwards or horizontally on the knife shelf *. * depending on model Delivery 1 Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier. [. . . ] The LED for button # flashes and the digital display 8 displays the factory setting : . 5 Press programme button # until the factory set value : is indicated on the digital display 8. The end of the programme is also indicated by an acoustic signal. This function can be changed as follows: 1 2 3 Open the door. Hold down programme button # and press START button )" until : . . . . The LED for button # flashes and the digital display 8 displays the factory setting : . 5 Press programme button # until the factory set value : is indicated on the digital display 8. 4 4 To change the setting, 1 Press programme button 3. Each time the button is pressed, the set value increases by one level; when the value of : has been reached, the display jumps back to : (off). 2 3 Press START button )", the set value is saved. Close the door. To change the setting, 1 By pressing the 3 button, you can switch the on board computer (additional programme information) off : or on : . 3 Close the door. 17 Automatic switch off after end of programme or interior light* * depending on model To save energy, the dishwasher can be automatically switched off 1 min or 120 min after the programme ends. The setting can be selected from : : to : . Switching off the appliance Short time after the end of the programme: 1 2 3 4 Open the door. Turn off the tap (not applicable if Aqua-Stop fitted). Remove the utensils when they have cooled down. Appliance does not switch off automatically. The interior light 1" comes on when the door is opened irrespective of whether the ON/OFF switch ( is switched on or off. When the door is closed the light is off. If the door is open for longer than 60 min. , the light switches off automatically. The interior light 1" is lit only when the set value : is selected. Hold down programme button # and press START button )" until : . . . The LED for button # flashes and the digital display 8 displays the factory setting : . ã=Warning At the end of the programme please open the door fully and not partially when emptying the dishwasher. Any escaping water vapour could damage sensitive worktops. : : 1 2 3 Interrupting the programme 1 2 Open the door. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. [. . . ] Only this extension guarantees compliance with the currently valid regulations. The appliance features a water damage protection system. Please note the system will not function unless the power supply is connected. Removing the appliance Also observe the sequence of worksteps here. 1 2 3 4 5 6 Disconnect the appliance from the power supply. [. . . ]