User manual GAGGENAU VG421210

[. . . ] Operation, Maintenance and Installation Manual VG 421 CA Gas Cooker VG 421 CA FOR YOUR SAFETY Page 2 1. Important Information for Installation and Use Page 3 2. Important Notes Page 6-7 For Your Safety Page 6 Operating for the First Time Page 6 To Use Page 7 4. Features Page 8 Features of the Appliance Page 8 Control Knobs Page 8 Burner Parts Page 8 5. [. . . ] Use pots and pans with a thick base, because heat distribution is particularly improved in the low setting. Using the correct size of pots and pans for the burner ensures improved cooking performance and energy efficiency. To ensure an even distribution of heat, center the pot above the burner. The flames should be covered by the pot base. Place the pot or pan securely and level on the pot grid. Turn the pan handle to the side, it should not point to the front. In order to guarantee a secure position on the pot grid, the pot base should be flat and not warped or dented. Placing a fitting lid on the pot will shorten cooking times. Through a glass lid you can watch the cooking progress without having to take the lid off. 12 9. Cleaning and Care burner assembly burner head cover burner ring The burners (burner head cover, burner ring and burner head) will change their color during operation and become darker. This change in color will not influence the use-value. Please thoroughly clean the appliance before operating it for the first time and after every use. Do not use scouring agents, abrasives or chemically aggressive cleaners (for example oven cleaner)!Do not use any nitro polishing agents for cleaning!Before cleaning, please wait until the cooktop has cooled to hand-warm !· First lift the pot grid with both hands (be careful not to scratch the base). · Remove the burner head cover, the burner rings and the burner head. · Soak burnt-in remainders in a little water and detergent. This loosens even the most stubborn of soiling. Do not use any abrasive agents and abrasive sponges. · Only use very little water to clean your cooktop. Be careful that no water enters the burner base. [. . . ] · Detach the spindles between the control knobs and the gas taps. · Turn the black plastic part so that the recess is above the nozzle. Screw out nozzle and take nozzle out with small pliers. · Replace both low setting nozzles on the gas taps according to the new gas type and as detailed in the low setting nozzle table. [. . . ]