User manual GAGGIA STIRO GAGGIA PROFESSIONAL

[. . . ] We have studied our products down to the tiniest detail to combine modern design with maximum functionality. The appliance is quickly ready for use and there are none of those long waits for the boiler to fill. This is what you get from appliance you have purchased: professional quality ironing in your home, plus energy saving and completely safe work conditions, all thanks to the characteristics of this product. [. . . ] We advise you to use demineralised water. When you use the appliance for the first time, fumes or steam that are not perfectly clean could come out - this is due to the evaporation of certain substances contained in the materials used. We recommend you to leave the appliance and iron at maximum temperature for a few minutes and then direct the first steam jet toward a cloth before beginning to iron. For best ironing results, you may vary the quantity of steam according to type of fabric. To do this, turn the steam control knob on the appliance, and then press the iron push-button at intervals to obtain the necessary steam. Ironing must be done on surfaces resistant to high temperatures, and which allow steam to permeate. The tank contains cold water and, therefore, filling is absolutley safe and can be done quickly at any time. This means you can iron non-stop without any long pauses while waiting for the boiler to fill. 8 litres of water, taking care not to allow the tank to overflow. Fit the power plug (10) into a suitable, earthed socket. â· Turn the switch/commutator (4) into position 1 (supplying power to the generator + iron) - the steam pressure indicator-light (8) lights up. At this temperature, you can steam iron any type of fabric. â· Wait for the steam pressure indicatorlight (8) to go off (less than three minutes). Press the iron steam control push-button (1) for the first time to release the air inside the boiler and steam tube. During this first operational stage, some small drops of water caused by condensation may come out together with the steam. We advise you to direct the first jet A few moments later, the steam indicator-light (8) goes off again and you can begin to iron in the normal way (fig. [. . . ] The appliance is supplied with thermal protection device - if it is tripped, it must be replaced in Gaggia's Authorised Service Centres only. For all repairs, use Gaggia original spare parts only. â· Do not throw the protective packing materials (for transport) into domestic refuse. [. . . ]