User manual GAMES NINTENDO SUPER NES WOLFENSTEIN 3-D

[. . . ] Just insert a memory card removed from a digital camera or other device, and you will be able to view the images immediately. (. page 14, 45) x Various slideshow styles The displayed image can be switched automatically as though you are turning the pages of an album yourself. You can select from various slideshow styles, including the ones displaying a clock or calendar. You can also change playback settings such as the playback order. [. . . ] Doing so may damage the photo frame or the memory card or corrupt the data. · Sort is automatically canceled in the following cases: ­ When the playback device is changed ­ When images on a memory card are sorted and the memory card is removed. To enlarge an image, press (zoom in) on the remote control. To reduce an enlarged image, press (zoom out). Each press of the button enlarges the image further. You can enlarge an image to a maximum of 5 times the original scale. You can move an enlarged image up, down, left, and right. To save an enlarged or a reduced image (Crop and save) 1Press MENU while the enlarged or reduced image is displayed. If you select [Save as new image], a copy of the image is saved. If you select [Overwrite], the new image overwrites the old image. 3Press v/V to select the device on which to save the image and press . 4Press v/V to select a destination folder, and press . 6When the confirmation screen appears after you finish saving the image, press . Tip If you move the enlarged image with B/b/v/V and press MENU in step 1, the image is trimmed into the displayed image size and saved. The power supply of the photo frame will be turned on when the blue time zone time occurs. The color of the selected time zone changes to gray, after you select the blue time zone and then press . The power supply of the photo frame is turned off while it is in the gray time zone. Advanced operations Tip The power is turned off automatically at the time you set for [Power-OFF timer] when you are using the photo frame. The power is turned on automatically at the time you set for [Power-ON timer] during the standby mode. 2Press B/b/v/V to select [OK] and then press . 6 Press MENU. 33 GB Changing the settings You can change the following settings. · · · · Slideshow Settings Auto Power ON/OFF Date/time Settings General Settings (Listing Order, Sony logo ON/OFF* etc, . ) * Turning on the Sony logo is the function only available for WOLFENSTEIN 3-D/D85/D95. · Language Setting · Initialize 4 Press v/V to select the item you want to change and then press . This enables you to set each of the items (page 35). Note When the photo frame is, for instance, displaying a slideshow, some settings of some items cannot be changed. They are displayed in gray and cannot be selected. 5 Press v/V to select a setting value and then press . Each time you press v/V, the setting value changes. In the case of a numerical value, press V to increase the value and press v to decrease the value. If you press , the setting is confirmed. Setting procedure 1 2 Press MENU. Press B/b to select the (Settings) tab. 6 Press MENU. The menu closes. To reset to factory default settings 1 2 Press MENU and then select (Settings) - [Initialize] by pressing B/b/v/V. [. . . ] · Do not attach any other material than the supplied label on the labelling position. When you attach the supplied label, be sure to attach it to the labelling position. Be careful that the label does not stick out. Continued Displaying Deleting/ Saving OK OK OK*5 OK*5 OK*5 OK*5 OK*5*6 OK*5 OK*5 OK*5 OK*5*6 OK*5 *2 *3 *4 *5 The photo frame supports FAT32. The photo frame has been demonstrated as operable with a "Memory Stick" with a capacity of 32 GB or less manufactured by Sony Corporation. [. . . ]