User manual GAMES SEGA DREAMCAST SEGA BASS FISHING 2

[. . . ] NOTE: Never remove the memory card or disconnect the controller while the game data is being saved or loaded. FISH BEING CAUGHT PLAYING WITH THE FISHING CONTROLLER The Fishing Controller does not have an Extension Socket for a memory card. To save game files when using the Fishing Controller, connect a Dreamcast Controller (with an inserted memory card) into any of the Control Ports. You will not be able to use the Dreamcast Controller to play Sega Bass Fishing 2 when the Fishing Controller is being used. Although it is possible to play Sega BassFishing 2 using only the fishing controller, you will be unable to save game files. MOVING AROUND WITH BOAT BEFORE CASTING THE J UMP PACKTM (SOLD SEPARATELY) Insert the Jump Pack into Expansion Socket 2 of the Dreamcast Controller. [. . . ] You don't need to use a lot of force. Note It is possible to cast while on both the Casting Direction Select screen and the Casting Method Select screen. On the Casting Direction Select screen, it is only possible to cast overhead. 6 7 SBF2 Manual 7_20. qxp 7/20/01 3:28 PM Page 10 FIGHT When you have successfully hooked the fish, reel it in. A Line Tension Gauge will appear on the right side of the screen. Pay attention to both the Line Tension Gauge and the action of the fish when reeling it in. CATCH When you reel the fish in close enough, the screen will change to the Catch screen. A Catch gauge with a red marker will be displayed at the bottom of the screen. Use the Analog Thumb Pad to control the rod. When the marker is within the yellow zone, press A to successfully catch the fish. If you fail, you will have to try again. NOTE: If you are using a Mad Catz Rumble RodTM, you must press B to successfully catch the fish. There are three zones on the Line Tension Gauge: green (low), yellow (medium), and red (high). When there is too much tension on the line, the gauge will flash, signaling that the line might break, resulting in the fish escaping. Stop reeling and wait for the tension to decrease. When there is not enough tension, the fish may unhook and escape. To reel in successfully, control your reeling speed. SUCCESSFUL CATCH When you successfully catch the fish, the name of the fish you caught and its weight will be displayed. You will resume fishing from the Casting Direction Select screen. By controlling the rod, you can also control the tension from rising too much. Use the Analog Thumb Pad $^ to move the rod left and right, and *@ to raise and lower the rod. Try to move the rod in the opposite direction to which the fish is moving. PAUSING THE GAME At any time during the game (except on the Select Area screen), press the Start Button to pause the game and display a Pause menu. Select BA CK and press A (or simply press the Start Button) to resume the game. Select QUIT to end the game (your action will be confirmed before quitting). TIME LIMIT You will fish until the given time limit. When the time limit nears, a message will be displayed to indicate this. 8 9 SBF2 Manual 7_20. qxp 7/20/01 3:28 PM Page 12 STARTING THE GAM E After the opening sequence, the Title screen will be displayed. Use *@ to select either NEW GAME or CONTINUE, and press the Start Button. When NEW GAME is selected, the Main Menu screen will be displayed. If CONTINUE is selected, the Load screen will be displayed (see p. 15). FREE FISHING In this mode, you can catch fish with the area, season, time of day and weather condition of your choice. SELECT AR EA Use $^ to select the lake/river to fish, and *@ to select the area on the lake/river. [. . . ] Depending on your record, you may earn the right to participate in the next tournament, a new lake selection to choose in Free Fishing mode, or a new lure. You may choose to weigh-in your bass in the menu window, but please keep in mind that doing so will end your fishing for the day. 12 13 SBF2 Manual 7_20. qxp 7/20/01 3:28 PM Page 16 DATA BOOK Here you can view your records. A menu of data you wish to view will be displayed. Use *@ to select the data to view, and press A to enter. [. . . ]