User manual GARMIN APOLLO 612B

[. . . ] Now, fly direct to the selected waypoint. D Press DIRECT-TO to define a direct course from your present position to a selected waypoint. Press the indicated key and then turn the LARGE knob to view the pages shown. Turn the SMALL knob for more info when available (diamond shown). Messages (MSG) Press DB Create WPT by Lat/Lon Create WPT by Radial/Dist Update User Wpt w/PPos Create Wpt by Grid (SAR Only) Delete User WPT Modify User WPT Delete WPT Comment Access Database Turn LARGE Knob Database (DB) Press FPL Active FPL FPL #1 . FPL #30 Create New FPL Flight Plan (FPL) Press MSG New Turn LARGE Knob Turn SMALL Knob Old Msg 1 . [. . . ] Turn LARGE Knob, then press ENTER. Nav Info Date/Time Model, SW Ver, S/N Fuel Units Baro Units Test Display Display Brightness Owner Name System Info GPS Sensor Healthy & Visible Satellites Satellites Used for Fix Satellite Search Status GPS Date & Time GPS Normal Reset Misc Sensors Encoding Altimeter Air Data Info Fuel Info Autonav Time Lat/Lon Units Program Nav Pages Turn LARGE Knob Direct-To CDI Scaling Turn LARGE Knob Turn LARGE Knob Flight Timer Trigger Turn LARGE Knob Mag Var Creating a Flight Plan Activating a Flight Plan 1. Turn the LARGE knob to the desired active flight plan and press SEL. Turn the SMALL knob to select the desired option and press ENTER. Turn the LARGE knob to the Access Database page and press ENTER. Turn the SMALL knob to select waypoint type. Turn the LARGE knob to the desired character and turn the SMALL knob to select characters. Turn the SMALL knob to view information. Press DB. Finding Info On A Waypoint 1. Turn LARGE knob to the "Create New Flight Plan" page and then press ENTER. 2. Salem, OR 97302 2001 by UPS Aviation Technologies, Inc. All Rights Reserved FAX (503) 364-2138 http://www. upsat. com USA 800-525-6726 Canada 800-654-3415 International (503) 391-3411 Approach Setup Summary Location Enroute Within 30 nm of Destination IAF Active Waypoint FAF Active Waypoint Enable Approach & enter altimeter setting (Approach annunciator turns ON) (CDI goes to 1 nm full-scale sensitivity) Load Approach Action Approach Checklist A. Load Destination Airport Load a destination airport. Load a stored Flight Plan, or edit the active Flight Plan. You may also use the DIRECT-TO button to choose a destination. The destination must be an airport that has an established approach capability. B. Load Approach Information At FAF (MAP Becomes Active) At MAP (TO/FROM Transition) 1. Press FPL twice to reach the home page Flight Plan Mode and press SEL, or press SEL while in the Nav function. Verify Approach annunciator is ON Verify/Set OBS/HLD: ON for Procedure Turn or Hold OFF to sequence Verify green Approach-Active annunciator is ON Verify altimeter setting is entered Verify/Set OBS/HLD: OFF to sequence to MAP Verify Approach-Active annunciator is ON (CDI goes to 0. 3 nm full-scale sensitivity) If NOT landing: Press OBS/HLD to cancel Approach-Active (Green Approach-Active annunciator turns OFF) (Approach Annunciator remains ON) (CDI goes to 1. 0 nm full-scale sensitivity) Verify OBS/HLD is ON 2. Press ENTER to prepare to load approach waypoints. 3. [. . . ] Turn the SMALL knob to display the available approach choices. Press ENTER to select the displayed approach path. DME-Arc Checklist Location At Arc Intercept Action 5. Turn the SMALL knob to display the approach legs. 6. [. . . ]