User manual GARMIN APOLLO GX60 QUICK REFERENCE GUIDE

[. . . ] Press ENTER when the name is complete. Activating a Flight Plan 1. Turn the LARGE knob to the desired active flight plan and press SEL. [. . . ] prompt will flash for the next waypoint. Press ENTER and repeat steps 5-7 until finished. Press SEL to stop editing your flight plan. 1999-2003 by Garmin AT, Inc. All Rights Reserved P/N 561-0236-03 Rev A September 2003 2345 Turner Rd. , S. E. Salem, OR 97302 FAX (503) 364-2138 http://www. garminat. com USA 800-525-6726 Canada 800-654-3415 International (503) 391-3411 Navigation (NAV) ENTER * GX60 only ** when configured Tuned Station** From/To/Next (Wpt) From/To/Next (ETA) Turn SMALL Knob Turn SMALL Knob From/To/Next (ETE) From/To/Next (Dist) Turn LARGE Knob Turn LARGE Knob Arc Assist Countdown Timer GPS Position Parallel Track (PTK) ETE, CDI, BRG, & RGE Press NAV Apollo GX60/65 Quick Reference Guide Nearest Waypoint (NRST) Press NRST Waypoint Information (INFO) Press INFO Turn LARGE Knob Altitude Assist RAIM* SEL D Press DIRECT-TO to define a direct course from your present position to a selected waypoint. Press ENTER to enter and save information. In the Comm function, ENTER saves the Standby frequency. Press SEL to edit information or to select options. Press the indicated key and then turn the LARGE knob to view the pages shown. Turn the SMALL knob for more info when available (diamond shown). SUA Runway Limits Search Around WPT User WPT LocDme INT NDB VOR Airport (ARPT) 4. Now, fly direct to the selected waypoint. Use LARGE & SMALL knobs to select waypoint ident or name. Turn the SMALL knob to select waypoint type. Then turn LARGE knob to the waypoint ident or name. (Check the Direct-To options in System-Nav Info) *GX60 when enabled WPT Comment Sunrise/Sunset Lat/Lon Approaches* Runways Map Fuel Type & Elevation Frequencies Bearing & Dist Ident, Type, & City/Facility Name Direct-To Map Setup SAR Map* Map Only Map plus Nav Moving Map (MAP) SAR Position* SAR Setup* ATC Ring Airspace Buffers Airspace Setup Press MAP Airspace Types (B, C, MOA, Training, Unknown, Alert, Caution, Danger, Restricted, Prohibited, & Warning) Track History (Strat, Clear, Used) Track History (On, Save, Int) Symbol & ID Setup Route Line, Map Orient, & Map Reference * when enabled Approach Setup Summary A. [. . . ] Follow prompts to turn to next leg GX60 Only GX60 Only On Arc Inbound Leg Intercept Messages (MSG) Press MSG Database (DB) Press DB Flight Plan (FPL) Press FPL Comm Radio (COM) Press COM New Create WPT by Lat/Lon Create WPT by Radial/Dist Update User Wpt w/PPos Create Wpt by User Grid* Delete User WPT Modify User WPT Delete WPT Comment Access Database * when enabled Active FPL Turn LARGE Knob to change MHz Turn SMALL Knob to change kHz Press <-> to toggle Active & Standby Press MON to monitor Standby Press MEM to memorize Standby Press RCL to recall stored frequencies Turn the LARGE Knob to view frequency types Turn the SMALL Knob to view frequencies for selected type Turn LARGE Knob Turn SMALL Knob Turn SMALL Knob Old Msg 1 . Old Msg n Turn LARGE Knob Old Turn LARGE Knob New Msg 1 . [. . . ]