User manual GARMIN APPOLO CNX80 QUICK REFERENCE GUIDE

[. . . ] Apollo CNX80 Quick Reference Guide Comm Radio (COM) Press COM Turn Large Knob to change MHz. Press <-SBY or <-A-> Press Audio to view and edit levels. Turn Large and Small knobs to choose name & frequency. Press RCL to recall (Recent) stored frequencies. [. . . ] (Right) Annunciations Waypoint Waypoint to Waypoint Destination Waypoint Present Position to Active Waypoint Com Radio Window Map Page (1-4) Track Map Scale Bearing to Active Waypoint Compass Arc Nav Radio Window Ownship Symbol Timer Display (when active) Estimated Time En Route to Active Waypoint Remote Transponder Window CDI Window Flightplan Suspension Annunciator Message Ground Annunciator Speed FAX (503) 364-2138 http://www. garminat. com Smart Key Labels P/N 561-0281-00B August 2003 2003 by Garmin AT, Inc. All Rights Reserved Moving Map (MAP) Press MAP 1. Turn the Large knob to view the map pages. The Nav Data area on the left side of the display can be customized in Map pages 2 - 4. Turn the Small knob to change the map scale. Press the Menu/Enter key to show the available line selection keys for Map mode. Press the line selection key next to the menu item for that choice. Press the More key to advance to the next list of menu items. Press the Menu/Enter key again to make the list go away or just wait for a few seconds. Customizing Nav Data 1. Press Map, then turn the Large knob to Map pages 2 - 4. Press Menu/Enter, then press the More line selection key until the Nav Data key is shown. Press Nav Data to toggle the display of the standard default or your customized Nav Data. Press Sel Data (the Nav Data key must be highlighted). You can know customize the Nav Data on the left side of display. Turn the Large knob to move to the item to edit. Press Sel Data or Menu/Enter to save your changes. Menu Items Airports, VORs, NDBs, Intersections, User Wpts, Lo and Hi Airways Airspace Description Solid reversed means ident, and symbol are displayed. A bold outline means only symbol is displayed. A thin outline means item not displayed. Solid reversed means airspace outline and sector lines are shown. A bold outline means airspace outline only displayed. A thin outline means airspaces are not displayed. Toggles display of flight plan route line. [. . . ] Press CrsTo (you may have to press More first). Use the Large and Small knobs to change the course value. Press Menu/Enter . Navigating a Pilot Nav Leg 1. Some routes may require manual navigation by the pilot between waypoints. [. . . ]