User manual GARMIN C129 APPROACH CHECKLIST

[. . . ] Apollo NMC 2001/2101 Approach Checklist Location Enroute Within 30 nm of Destination Load Approach Enable Approach & enter altimeter setting (Approach annunciator turns ON) (CDI goes to 1 nm full-scale sensitivity) Verify Approach annunciator is ON Set OBS/HLD: ON for Procedure Turn or Hold OFF to sequence Verify green Approach-Active annunciator is ON Verify altimeter setting is entered Set OBS/HLD: OFF to sequence to MAP Verify Approach-Active annunciator is ON (CDI goes to 0. 3 nm full-scale sensitivity) If NOT landing: Press OBS/HLD to cancel Approach-Active (Green ApproachActive annunciator turns OFF) (Approach Annunciator remains ON) (CDI goes to 1. 0 nm full-scale sensitivity) Verify OBS/HLD is ON Action IAF Active Waypoint FAF Active Waypoint At FAF (MAP Becomes Active) At MAP (TO/FROM Transition) MAHP Active Waypoint Apollo NMC 2001/2101 DME-Arc Checklist Location At Arc Intercept Action 1. [. . . ] Verify/Set autopilot in Heading mode or disengaged 1. Use DME-Arc page in NAV mode and aircraft heading to navigate 2. Use CDI/HSI to identify inbound leg intercept 1. Press NAV twice to use standard NMC NAV mode page 4. [. . . ] Salem, OR 97302 USA Toll-Free 800. 742. 0077 [. . . ]