User manual GARMIN ECHO 100 INSTALLATION INSTRUCTIONS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GARMIN ECHO 100. We hope that this GARMIN ECHO 100 user guide will be useful to you.

Lastmanuals help download the user guide GARMIN ECHO 100.


GARMIN ECHO 100 INSTALLATION INSTRUCTIONS: Download the complete user guide (1672 Ko)

You may also download the following manuals related to this product:

   GARMIN ECHO 100 (477 ko)
   GARMIN ECHO 100 IMPORTANT SAFETY AND PRODUCT INFORMATION (451 ko)

Manual abstract: user guide GARMIN ECHO 100INSTALLATION INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

[. . . ] screw and insert the screw through the mounting bracket, transducer, spacer, and rubber washer. You will adjust the transducer and tighten the nut after you install the transducer on the boat. Installing the transducer on a transom Selecting a transom-mount Location Select a transom-mount location while considering these guidelines for optimal performance. · Mount the transducer as close to the center of the boat as possible. · Do not mount the transducer behind strakes, struts, fittings, water intake or discharge ports, or anything that creates air bubbles or causes the water to become turbulent. [. . . ] worm gear clamp (not included) instead of the cable tie. Installing the Swivel Mount 1. Fasten the mount with the cables installed in the mount (page 4), or without the cables installed in the mount (page 4). Selecting a Swivel-Mount Location Select a location to install the swivel mount, while considering these guidelines. · The location provides a clear view of the screen and access to the keys on the echo. · The location is sturdy enough to support the device and the mount. · You can route the cables either from under the swivel mount, or from behind the device. · The location is the appropriate distance from a compass (page 6). Preparing the Swivel-Mount Base Installation Notice Use pan-head screws or bolts when securing the swivel-mount base. Screws or bolts with countersunk heads will damage the base. 2. Place the transducer mount against the body of the trolling motor with the front of the transducer pointed away from the propeller. (50 cm) cable tie around the body of the trolling motor, but do not fully tighten the cable tie. Properly align the gasket between the transducer mount and the body of the trolling motor, and tighten the cable tie. Position the transducer so that it will be parallel with the bottom when in use, tighten the 10-32 locking nut until it touches the mounting bracket, and tighten 1/4 turn more (do not overtighten). (14 cm) cable ties to secure the transducer cable to the motor shaft. If necessary, fill the forward-facing portion (except the cable tie pocket) of the transducer mount with sealant to avoid accumulation of debris. Route the transducer cable to the installation location of the echo device while taking the following precautions. · Avoid routing the cable close to electrical wires or other sources of electrical interference. · Make sure that the cable will not become pinched when the trolling motor is deployed and recovered. 1. After you have chosen the location to install the swivel mount (page 3), determine whether you will attach the mount to the surface using screws or bolts, and choose the appropriate fastening hardware: · To attach the base with screws, use self-tapping, pan-head wood screws, either size #8 or a diameter of 5/32 in. · To attach the base with bolts, use pan-head bolts, either size #8 or a diameter of 5/32 in. If you plan to route the cables from under the mounting surface, orient the swivel base so that the pass-through holes face the desired direction. If you plan to route the cables from under the mounting surface, mark the location in the center . [. . . ] (213 m) Display *Depth capacity is dependent on water salinity, bottom type, and other water conditions © 2011 Garmin Ltd. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN ECHO 100

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN ECHO 100 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag