User manual GARMIN G1000 MOONEY QUICK REFERENCE CARD M20M M20R

[. . . ] Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. Tel: 503/391. 3411 Fax 503/364. 2138 Garmin (Europe) Ltd. , Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, Hampshire S051 9DL, U. K. Tel: 44/0870. 8501241 Fax: 44/0870. 8501251 Garmin Corporation, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel: 886/02. 2642. 9199 Fax: 886/02. 2642. 9099 Web Site Address: www. garmin. com Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. [. . . ] Press the ALERTS Softkey to place the cursor in the `AIRSPACE ALERTS' field. Turn either FMS Knob to select the desired airspace. Press the FMS Knob to remove the flashing cursor. View and Quickly Load the Frequency for a Controlling Agency 1) With the Nearest Airspace Page displayed, press the FREQ Softkey to place the cursor in `FREQUENCIES' field. Turn either FMS Knob to select the desired frequency. Press the ENT Key to load the frequency into the COM frequency standby field. Press the FMS Knob to remove the flashing cursor. 2) 3) 4) 7-10 Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 8 ­ FLIGHT PLANNING SECTION 8: FLIGHT PLANNING The following discussions pertain to the Multi Function Display, unless otherwise indicated. 4) 5) 6) 7) Repeat steps 2 and 3 until the desired name is entered. Press the ENT Key a again to accept the new waypoint identifier. The cursor is now in the `REFERENCE WAYPOINTS' field. If desired, the waypoint can be defined by a reference waypoint. Turn the FMS Knobs to enter the position coordinates or the radial and distance from the reference waypoint. Press the FMS Knob to remove the flashing cursor. With `OK' highlighted, press the ENT Key to activate the flight plan. To cancel the flight plan activation, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. 4) 8-2 Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 8 ­ FLIGHT PLANNING 8. 4 1) ACTIVATE A FLIGHT PLAN LEG From the Active Flight Plan Page, press the FMS Knob to activate the cursor and turn the large FMS Knob to highlight the desired destination waypoint. Press the ACT LEG Softkey (using MFD only). This will not delete the stored flight plan, only the active flight plan. 2) 3) Figure 8-7 Delete Flight Plan Confirmation 8. 6 1) 2) INVERT ACTIVE FLIGHT PLAN From the Active Flight Plan Page, press the MENU Key to display the Page Menu. Turn the large FMS Knob to highlight `Invert Flight Plan' and press the ENT Key. The original flight plan remains intact in its flight plan catalog storage location. With `OK' highlighted, press the ENT Key to invert the flight plan. Press the MENU Key, select the `Activate Leg' option from the page menu and press the ENT Key. This step must be used when activating a leg from the PFD. With `Activate' highlighted, press the ENT Key. 4) 3) Figure 8-5 Activate Flight Plan Leg Confirmation 8. 5 1) 2) STOP NAVIGATING A FLIGHT PLAN Press the FPL Key to display the Active Flight Plan Page. Press the MENU Key to display the Page Menu Window. Figure 8-8 Invert Flight Plan Figure 8-9 Invert Flight Plan Confirmation Figure 8-6 Delete Flight Plan 3) Turn the large FMS Knob to highlight `Delete Flight Plan' and press the ENT Key. With `OK' highlighted, press the ENT Key to deactivate Garmin G1000 Cockpit Reference Guide for the DA42 8-3 SECTION 8 ­ FLIGHT PLANNING 8. 7 CREATE A NEW FLIGHT PLAN Catalog Page. [. . . ] Update flight plan with current waypoint. Arriving at waypoint [xxxx], where [xxxx] is the waypoint name. Special use airspace is ahead of aircraft. The aircraft will penetrate the airspace within 10 minutes. [. . . ]