User manual GARMIN G1000-CESSNA NAV III COCKPIT REFERENCE GUIDE

[. . . ] G1000 TM Cockpit Reference Guide for the Cessna Nav III Copyright © 2004, 2005 Garmin Ltd. This manual reflects the operation of System Software versions 0394. 06 or later for Cessna 172R aircraft, 0395. 07 or later for Cessna 172S aircraft, 0371. 15 or later for normally aspirated Cessna 182 aircraft, 0372. 14 or later for turbocharged Cessna 182 aircraft, 0373. 10 or later for normally aspirated Cessna 206 aircraft, and 0374. 10 or later for turbocharged Cessna 206 aircraft. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. NOTE: Cessna Nav III aircraft include the Cessna 172R, the Cessna 172S, the normally aspirated Cessna 182 (182), the turbocharged Cessna 182 (T182), the normally aspirated Cessna 206 (206), and the turbocharged Cessna 206 (T206). Unless otherwise indicated, information in the G1000 Cockpit Reference Guide pertains to all Cessna Nav III aircraft. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] Turn the large FMS knob to highlight `Invert Flight Plan' and press the ENT key. The original flight plan remains intact in its flight plan catalog storage location. With `OK' highlighted, press the ENT key to invert the flight plan. 4. 3. Figure 8-5 Activate Flight Plan Leg Confirmation 8. 5 1. 2. STOP NAVIGATING A FLIGHT PLAN Press the FPL key to display the Active Flight Plan Page. Press the MENU key to display the Page Menu window. Figure 8-8 Invert Flight Plan Figure 8-9 Invert Flight Plan Confirmation 8. 7 Figure 8-6 Delete Flight Plan CREATE A NEW FLIGHT PLAN Press the FPL key and turn the small FMS knob to display the Flight Plan Catalog Page. Press the NEW softkey to display a blank flight plan page for the first empty storage location. 3. Turn the large FMS knob to highlight `Delete Flight Plan' and press the ENT key. With `OK' highlighted, press the ENT key to deactivate the flight plan. This will not delete the stored flight plan, only the active flight plan. To create a new flight plan using the MFD: 1. 2. Figure 8-7 Delete Flight Plan Confirmation Garmin G1000 Cockpit Reference Guide for the Cessna Nav III 8-3 SECTION 8 ­ FLIGHT PLANNING 1. 2. Figure 8-10 Create FPL on MFD Press the FPL key and press the small FMS knob to activate the cursor. Turn the small FMS knob to enter the first character of the flight plan starting identifier. Turn the large FMS knob to move the cursor to the next character field. Turn the small FMS knob to enter the next character. Continue this process until the desired identifier is entered. Press the ENT key and the cursor is now ready for entering of the next flight plan waypoint. Repeat steps 2 through 5 to enter the identifier for each additional flight plan waypoint. Once all waypoints have been entered, press the FMS knob to return to the Active Flight Plan Window. 3. 4. 3. Turn the small FMS knob to display the Waypoint Information Page. Turn the small FMS knob to enter the first character of the identifier of the departure waypoint. Turn the large FMS knob to move the cursor to the next character field. Repeat using the FMS knobs until the desired identifier has been entered. 5. 7. Figure 8-11 Waypoint Info Window 4. [. . . ] ARSPC NEAR ­ Airspace near and Special use airspace is near and ahead of the aircraft position. ahead. Garmin G1000 Cockpit Reference Guide for the Cessna Nav III 12-17 SECTION 12 ­ ANNUNCIATIONS & ALERTS Miscellaneous Message Advisories (Cont. ) Alerts Window Message Comments ARSPC NEAR ­ Airspace near ­ less Special use airspace is within 2 nm of the aircraft position. LEG UNSMOOTH ­ Flight plan leg will The approaching flight plan waypoints are too close to allow for smooth turns. Prepare for steep turns ahead and expect noticeable course deviations. [. . . ]