User manual GARMIN G1000-PIPER COCKPIT REFERENCE GUIDE

[. . . ] Integrated Flight Deck Cockpit Reference Guide Piper PA32 Copyright © 2004-2007 Garmin Ltd. This manual reflects the operation of System Software version 0648. 02 or later for the Piper PA32. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] Select an Airport from the Database 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. 2) Enter the desired airport identifier. 27) The aircraft maintains 10, 000 feet while following the magenta line through the hold as in Figure 7-52. Figure 7-52 Hold Established 7-22 Garmin G1000 Cockpit Reference Guide for the Piper PA32 SECTION 7 ­ NAVIGATION Select an Airport from the Active Flight Plan 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. 2) Turn the small FMS Knob to the left to display a list of flight plan airports as shown in Figure 7-54. 4) Turn the large FMS Knob to select the desired airport. Select a Recently Entered Airport Identifier 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. Initially, a flight plan waypoint list is displayed as in Figure 7-54. The list is populated only when navigating a flight plan. Figure 7-54 Flight Plan Airport List 3) Turn the small FMS Knob to the right to display the `RECENT' airports as shown in Figure 7-56. 3) Turn the large FMS Knob to select the desired airport. Select a Nearest Airport 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. Initially, a flight plan airport list is displayed as in Figure 754. The list is populated only when navigating a flight plan. Figure 7-56 Recently Entered Airports List 4) Turn the large FMS Knob to select the desired airport. Select an Airport by Facility Name or City Location 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. 2) Turn the large FMS Knob to select the facility name or location (city) field. 3) Enter the desired facility name or city. Figure 7-55 Nearest Airport List 3) Turn the small FMS Knob to the right to display the `NRST' airports to the aircraft's current position as shown in Figure 7-55. 5) Press the ENT Key. If there are duplicate names in the database, a list is displayed from which to choose the desired location. 6) To remove the flashing cursor, press the FMS Knob. 7-23 Garmin G1000 Cockpit Reference Guide for the Piper PA32 SECTION 7 ­ NAVIGATION Access Runway Information 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. 2) Turn the large FMS Knob to place the cursor on the `RUNWAYS' identifier field. 3) Turn the small FMS Knob in the direction of the green arrow to display the next runway for the selected airport. Continue turning the small FMS Knob to select the desired runway. 4) To remove the flashing cursor, press the FMS Knob. Access Frequency Information 1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor. 2) Turn the large FMS Knob to move the cursor to the Frequencies box. 3) Turn either FMS Knob to scroll through the list, placing the cursor on the desired frequency. [. . . ] The system will automatically transition to the next vertical waypoint. The lateral flight plan contains a procedure turn, vector, or other unsupported leg type prior to the active vertical waypoint. This will prevent vertical guidance to the active vertical waypoint. The current crosstrack exceeds the limit, causing vertical deviation to go invalid. [. . . ]