User manual GARMIN GDL 69A

[. . . ] GDL 69/69A XM Satellite Radio Activation Instructions TM 190-00355-04 September 2005 Rev. or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Hardware and required monthly subscription sold separately. [. . . ] Once the data channel is activated, bring up the XM Radio page on the MX20. This can be accomplished by pressing the FN key until XM is displayed. A non-activated unit will display only channel 0 (Radio ID), channel 1 (XM Preview) and channel 247 (Emergency Alert). An activated unit will display the full list of XM's channels. Tune to channel 1, while waiting for audio activation. 2. 1. 1 Accessing the MX20 Activation Page To access the activation page on the MX20 perform the following steps: 1. Press the FN key until the FIS function is displayed. Press the fourth smart key until STATUS is displayed. Press the line select key next to Products. Diagnostics and Start Diag will be displayed. (In software version 5. 5, Start Diag will not be displayed). Press the line select key next to Diagnostics. XM Service should activate in 45 to 60 minutes. During the activation process, the unit may display several different activation levels. When the service class (Aviator Lite, Aviator, or Aviator Pro) that you subscribed to is displayed, press the ACCEPT smart key to lock in the activation. At the time of printing, Aviator Pro is not available. Audio Radio ID Data Radio ID Line Select Keys Smart Keys Figure 2-1. Data Radio ID and Audio Radio ID Locations Figure 2-2. MX20 with Full Channel List Page 2 XM Activation Procedures 190-00355-04 Rev. F 2. 2 Refreshing If the unit is not activated after one hour a `refresh' maybe needed. To accomplish this go to the website www. xmradio. com/refresh as pictured below. It is not recommended for the aircraft to be in a hangar. Hook up the aircraft to external power if available. It may take 45-60 minutes or more, depending on the demand on the XM activation system. [. . . ] NEXRAD data is displayed on the screen similar to Figure 4-3, if available. Figure 4-3. Weather Page 4. 3. 2 Verify Graphical METAR To display Graphical METARs on the NAV Weather Page: 1. The upper left hand corner field flashes. Page 8 XM Activation Procedures 190-00355-04 Rev. Turn small right knob and select `METAR'. 4. [. . . ]