User manual GARMIN GDL 40 INSTALLATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GARMIN GDL 40. We hope that this GARMIN GDL 40 user guide will be useful to you.
Lastmanuals help download the user guide GARMIN GDL 40.
Manual abstract: user guide GARMIN GDL 40INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] GDL® 40 Installation Instructions
About the GDL 40
The GDL 40 antenna provides GSM weather data to compatible Garmin chartplotters on your NMEA 2000® network. The GDL 40 communicates with nearby cellular towers to receive weather data, purchased directly from a Garmin chartplotter on a day-to-day basis, as needed. After you successfully register and activate the antenna, you then purchase a day-pass directly from the chartplotter as needed.
Installing the GDL 40
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. When drilling or cutting, always check what is on the opposite side of the surface.
CAUtIoN
Contacting Garmin Product Support
· Go to www. garmin. com/support. [. . . ] Connect a NMEA 2000 drop cable to the antenna . If you are using an external cellular antenna (page 5), connect it to the GDL 40 antenna .
GDL 40 Installation Instructions
7. Route a NMEA 2000 drop cable through the pole-mount bracket and the pole, and connect the cable to the antenna. Place the antenna on the pole-mount bracket, and twist it to lock it in place. Secure the antenna to the bracket with the included M3 set screw . Route the NMEA 2000 drop cable away from sources of electronic interference. Connect the antenna to your NMEA 2000 network (page 5). After the antenna is installed on the pole mount, fill the vertical cable slot with a marine sealant (optional).
4
11. Route the NMEA 2000 drop cable away from sources of electronic interference. Connect the antenna to your NMEA 2000 network (page 5).
Certified Cables and Connectors
· Digital Antenna PowerMaxTM cable, part number DA240-30NM · SubMiniature version A (SMA) male to Mini UHF female RF connector adapter Bomar Interconnect part number 9316505 Amphenol® Connex part number 242116
Connecting the GDL 40 Antenna to a NMEA 2000 Network
If you are unfamiliar with NMEA 2000, see the "NMEA 2000 Network Fundamentals" chapter of the Technical Reference for Garmin NMEA 2000 Products for more information. Go to www. garmin. com /garmin/cms/us/onthewater/nmea2000, and click Manuals. Create a NMEA 2000 network on your boat, if you do not have one. You can purchase required cables and connectors from www. garmin. com /marine or your local marine dealer. Connect the antenna to your NMEA 2000 network using the NMEA 2000 drop cable and a T-connector. (6 m) drop cable is not long enough, add an extension to your NMEA 2000 backbone, based on the NMEA 2000 guidelines. Note: If you have not already registered your GDL 40 (page 1), you must power-cycle the NMEA 2000 network after you complete the registration process.
Connecting an External Cellular Antenna to the GDL 40
1. Mount the cellular antenna according to the manufacturer's instructions. Connect the antenna cable to the cellular antenna using the male Type N connector. Connect the SMA to Mini UHF adapter to the Mini-UHF connector on the antenna cable. Connect the antenna cable (with the adapter installed) to the SMA connector on the bottom of the GDL 40.
Configuring the GDL 40 for Use with an External Cellular Antenna
If you connect an external cellular antenna to the GDL 40, you must specify that you want to use the external antenna instead of the internal antenna on the GDL 40. On a chartplotter connected to the NMEA 2000 network, select Configure > Communications > NMeA2000 Setup > DeviceList > GDL40 > Configure > GSMAntenna. Select external.
Installing an External Cellular Antenna
In some instances, you can increase the reception range of your GDL 40 antenna by connecting a certified external cellular antenna (sold separately). [. . . ] SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Garmin retains the exclusive right to repair or replace (with a new or newlyoverhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN GDL 40
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN GDL 40 will begin.
