User manual GARMIN GPS 165 TSO PILOT'S GUIDE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GARMIN GPS 165 TSO. We hope that this GARMIN GPS 165 TSO user guide will be useful to you.

Lastmanuals help download the user guide GARMIN GPS 165 TSO.


GARMIN GPS 165 TSO PILOT'S GUIDE: Download the complete user guide (945 Ko)

You may also download the following manuals related to this product:

   GARMIN GPS 165 TSO PILOTS GUIDE (1042 ko)

Manual abstract: user guide GARMIN GPS 165 TSOPILOT'S GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] OWNER'S MANUAL & REFERENCE MSG RTE NRST WPT SET NAV CLR CRSR ENT GPS 165TSO Pilot's Guide ® INTRODUCTION Foreword This manual is written for software versions 3. 06 or above, and is not suitable for earlier software versions. © 1995 GARMIN International 9875 Widmer Road, Lenexa, KS 66215, USA GARMINTM, GPS 165TSOTM, AutoLocateTM, MultiTrac8TM, Spell'N'FindTM and AutoStoreTM are trademarks of GARMIN International and may only be used with permission. JeppesenTM and NavData® are registered trademarks of Jeppesen Sandersen and are used with permission. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose without the express written permission of GARMIN Corporation. Information in this document is subject to change without notice. GARMIN reserves the right to change or improve their products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. April 1995 190-00066-00 Rev. [. . . ] If you enter an offset which causes a leg to be reversed, you'll be informed with the message `Ofst too big for rte'. If you change the active route in any way, perform a direct-to, or re-activate the route, you'll be informed with an`Offset nav cancelled' message. Flying and Modifying the Active Route Once a route has been created and activated, the GPS 165 will provide navigation to each route waypoint through the active route and CDI pages. From the active route pages, you may create and modify the active route, and insert an approach, SID or STAR for your flight. The CDI page will display detailed navigation data on your progress to each route waypoint, and provide turn anticipation, waypoint arrival and next desired track information. By understanding the relationship between the active route and CDI pages and the role of the GPS SEQ switch, you'll be able to get the most out of the GPS 165's advanced route and approach features. Whenever the GPS 165 is navigating a direct-to, route or approach, the active route page will provide a list of the route waypoints in sequence, along with distance, time and course information. You may also create and edit a route directly from the active route page. If you want to save a route created from the active route page (Route 0), you must copy it to an open storage route (see page 54) before turning the unit off or activating another route. The active route page may be displayed by pressing the R key and rotating O left continuously. It will also appear automatically whenever a route, approach, SID or STAR is activated. To scroll through the active route waypoints: 1. Rotate K with the flashing cursor inactive (or O with the cursor active). DIRECT-TO & ROUTE NAV Flying the Active Route USING THE ACTIVE ROUTE PAGE The GPS 165's active route page provides a working list of the route you are navigating, allowing you to view all route waypoints, along with distance, and timing or desired track information. The scrolling arrow prompt to the left of the route waypoint list indicates which way to scroll to view additional route waypoints. The active route page can also be used to manually select your next `active to' destination, which allows you to fly the route out of sequence without modifying it. The GPS 165 will resume navigation of the remainder of the route in sequence once you arrive at the selected waypoint. The active leg identifiers field, located at the top left of the page, displays the waypoint identifiers of the route leg you are currently navigating. The first waypoint identifier displayed is the `active from' waypoint. The line connecting these waypoints is known as the `active leg'. If you are navigating a direct-to, the field will display the destination only. 57 DIRECT-TO & ROUTE NAV Adding Active Route Waypoints The `cum or leg' field can be selected to display cumulative distance and ete/eta or the distance and ete/eta for each individual route leg. If cumulative is selected, the first leg's distance will be displayed, while the second leg will represent the first leg's distance plus the second leg, and so on. This also applies to the ete/eta field, which may also be configured to display the desired track (dtk) for each leg, regardless of the cumulative or leg selection. To change the leg and ete/eta fields: 1. With the flashing cursor active, rotate O to highlight the field you want to change. Rotate K to select the desired setting and press C. Active route page with desired track displayed. The active route page may also be used to create a new route or edit the route you are currently navigating (approach, SID or STAR waypoints cannot be edited), and provides a fast method of selecting any route waypoint as your next destination waypoint without modifying the active route. If you are editing the active route and want to save it in its original form, copy it to an open storage route before editing. To add waypoints to the active route: Adding a waypoint to the active route. 1. [. . . ] Set the HSI to the next dtk value when the waypoint annunciator starts flashing. 3) The To/From indicator on the GPS CDI will flip momentarily to indicate that you have crossed the midpoint of the turn. Whenever an approach is selected and armed, the GPS 165 will begin a smooth CDI scale transition from the 5. 0 nm to the 0. 3 nm scale 30 nm from the destination airport (see right). The CDI scale will remain at the 0. 3 nm scale from the FAF to the MAP during the active approach. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN GPS 165 TSO

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN GPS 165 TSO will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag