User manual GARMIN GPS45

[. . . ] Owner's Manual & Reference GOTO PAGE MARK QUIT ENTER G P S 4 5 GPS45 Personal Navigator TM GPS 45 Personal NavigatorTM OWNER'S MANUAL Introduction Foreword Software Version 2. 20 or above © 1994 GARMIN INTERNATIONAL 9875 Widmer Road, Lenexa, KS 66215, USA All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or manual, including photocopying and recording, for any purpose without the express written permission of GARMIN. Information in this document is subject to change without notice. GARMIN reserves the right to change or improve their products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. [. . . ] Move the field highlight to the `act' field and press E. Inverting a route allows you to navigate route legs in reverse order, without editing the original route. To activate a route in inverted order: 1. Follow the same steps as above, but select the `inv' command field and press the E key. 30 Reference Once a route has been activated, the Active Route Page will appear, displaying the waypoint sequence of your route with the estimated time enroute (ETE) at your present speed and distance to each waypoint. As long as you are navigating an active route, the Active Route Page will become part of the main page sequence of the unit. The Active Route Page will also allow you to change the ETE field to display desired track (DTK) or estimated time of arrival (ETA) for each leg. You can also clear or invert the active route. Highlight the estimated time enroute (ETE) field and press the E key. Use the U or D keys to select `DTK' or `ETA' and press the E key. Active Route Page To invert a route from the Active Route Page: 1. Press the U key once to move the field highlight to the `invert' field. Press the E key to invert the route. To clear the active route from the Active Route Page and stop route navigation: 1. Use the U and L keys to select the `clear' field. Press the E key to clear the active route. Once a route has been created and stored in the GPS 45, it can be edited at any time, even if it is the active route. To edit a route from the Active Route Page or the route submenu page: 1. Use the U and D keys to select the waypoint you want to edit and press E. An on-screen menu of editing choices will appear, with options for reviewing, inserting, deleting or changing the waypoint field highlighted. Use the U and D arrow keys to select among the editing choices. 31 Reference Editing Routes and On-Route GOTOs Once you've selected a waypoint from the route list, choose a menu function: 1. To review the definition page for the waypoint, highlight the `review' field and press E. To add a new waypoint that precedes the selected waypoint, highlight the `insert' field and press the E key. To remove the selected waypoint, highlight the `remove' field and press the E key. To replace the selected waypoint with a new waypoint, highlight the `change' field and press the E key. Use the waypoint editing instructions described earlier (see page 29) for creating a route to complete your changes. If you are editing the active route (route 0), copy your new route version to an empty route to save it, as the active route will be overwritten by a new route activation. If you add, delete or change the first or last waypoint of a route, the default comment (first and last waypoint) will automatically be updated after your changes. [. . . ] PHYSICAL Case: Size: Weight: Temperature Range: PERFORMANCE Receiver: Acquisition Time: Differential-ready MultiTrac8TM Approx. 7. 5 minutes (AutoLocateTM) 1/second, continuous 5-10 meters (16-33 ft. ) with DGPS corrections* 15 meters (49 ft. ) RMS** 0. 1 knot RMS steady state Performs to specification to 3g's Waterproof, dry nitrogen-filled 6. 15"H x 2"W x 1. 23"D (15. 6 x 5. 1 x 1. 23 cm) 10 ounces (284g) w/ batteries 5º to 158ºF (-15º to 70ºC) Update Rate: Position Accuracy: Velocity Accuracy: Dynamics: POWER Input: Usage: Battery Life: (w/ alk. batt. ) 4 AA batteries or 5-40vDC . 75 watts 10 hours (normal mode) Up to 20 hours (battery saver mode) Specifications subject to change without notice. * With optional GARMIN GBR 21 Beacon Receiver Input. [. . . ]