User manual GARMIN GPSMAP 541

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GARMIN GPSMAP 541. We hope that this GARMIN GPSMAP 541 user guide will be useful to you.

Lastmanuals help download the user guide GARMIN GPSMAP 541.


GARMIN GPSMAP 541 : Download the complete user guide (3631 Ko)

You may also download the following manuals related to this product:

   GARMIN GPSMAP 541 CONFIGURATION GUIDE (412 ko)
   GARMIN GPSMAP 541 QUICK REFERENCE GUIDE (743 ko)
   GARMIN GPSMAP 541 QUICK REFERENCE GUIDE (743 ko)
   GARMIN GPSMAP 541 INSTALLATION INSTRUCTIONS (2577 ko)
   GARMIN GPSMAP 541 INSTALLATION INSTRUCTIONS (2577 ko)
   GARMIN GPSMAP 541 IMPORTANT SAFETY AND PRODUCT INFORMATION (218 ko)
   GARMIN GPSMAP 541 IMPORTANT SAFETY AND PRODUCT INFORMATION (218 ko)
   GARMIN GPSMAP 541 IMPORTANT SAFETY AND PRODUCT INFORMATION (EN) (218 ko)

Manual abstract: user guide GARMIN GPSMAP 541

Detailed instructions for use are in the User's Guide.

[. . . ] GPSMAP 400/500 series ® owner's manual © 2010 Garmin Ltd. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. [. . . ] Select Back. To select the engines for which information appears in the gauges, select Edit Engines and complete steps 2 through 5 of "Selecting the Engines Shown in Gauges" (following section). Selecting the Engines Shown in Gauges You must manually select the number of engines shown in the engine gauges (see above) before you can select the engines for which information appears in the gauges. 1. From the Home screen, select Information > Dashboard > Engine > MEnU > Gauge Setup > Engine Selection > Edit Engines. Select the number of the engine for which you want to view information in the first gauge or bar. For example, if you select "3, " the first engine bar shows information for the engine identified as "Engine3" on the NMEA 2000 network. Repeat step 3 for the second, third, and fourth engine bar, as needed. Select Back. Selecting the number of Engines Shown in Gauges The engine gauges can show information for up to four engines. 1. From the Home screen, select Information > Dashboard > Engine > MEnU > Gauge Setup > Engine Selection > num. Select the number of engines. GPSMAP 400/500 Series Owner's Manual Viewing Information Configuring Engine Gauges The amount of fuel on board can be represented by either the total fuel level (numeric) or by individual tank level (graphic). From the Home screen, select Information > Dashboard > Engine > MEnU > Gauge Setup > Fuel Display. · Use Total Fuel Level--select to display a numeric value for the total fuel level. Tanks--select to display a graphical representation of all the specified tanks. Viewing and Synchronizing Fuel Gauges Viewing Fuel Gauges To view engine information, your chartplotter must be connected to a device capable of measuring fuel level, fuel flow, or both. From the Home screen, select Information > Dashboard > Engine. Synchronizing Fuel Gauge readings with Fuel Levels From the Home screen, select Information > Dashboard > Fuel (or Engine) > MEnU. · Add Fuel To Boat--select when you have added less than a full tank. · Set Total Fuel Onboard--select to specify the total fuel in your tanks. Select Done. 40 GPSMAP 400/500 Series Owner's Manual Viewing Information Viewing and Customizing Wind Gauges From the Home screen, select Information > Dashboard > Wind. Selecting True, Apparent, or Ground Wind for the Wind Gauges The chartplotter must be connected to the peripheral devices listed below to capture the data shown on the wind speed graph. Wind Description Speed Apparent Shows wind speed data based on Wind the flow of air experienced while on a boat in motion. True Shows wind speed data based on Wind the flow of air experienced while on a stationary boat. Ground Shows wind speed data based on Wind the flow of air experienced while on shore. A wind sensor and a water speed sensor; or a wind sensor and a GPS antenna. A wind sensor, a waterspeed sensor, a heading sensor, and a GPS antenna; or a wind sensor and a GPS antenna; or a wind sensor, a water-speed sensor, and a heading sensor. Close hauled wind gauge Wind gauge Compass 1. From the Home screen, select Information > Dashboard > Wind > MEnU > Wind Type. Select Apparent Wind, True Wind or Ground Wind. GPSMAP 400/500 Series Owner's Manual 4 Viewing Information Configuring the Heading Source You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data received from a heading (or magnetic) sensor, and GPS heading data is calculated by your chartplotter GPS. From the Home screen, select Information > Dashboard > Wind > MEnU > Heading Source. 1. Tide-station information is shown. Viewing Tide-station Information Selecting the range of the Close Hauled Wind Gauge You can specify the range of the close hauled wind gauge for both the upwind scale and the downwind scale. From the Home screen, select Information > Dashboard > Wind > MEnU. Set the maximum and minimum angle values that appear when the upwind close hauled wind gauge appears. [. . . ] This product has not been endorsed or otherwise approved by the National Geospatial-Intelligence Agency, or the United States Department of Defense (10 U. S. C. 456, no civil action may be brought against the United States on the basis of the content of a navigational aid prepared or disseminated by either the former Defense Mapping Agency (DMA), National Imagery and Mapping Agency (NIMA), or the National Geospatial-Intelligence Agency (NGA). The DAFIFTM product is provided "as is, " and no warranty, express or implied, including, but not limited to the implied warranties of merchantability and fitness for particular purpose or arising by statute or otherwise in law or from a course of dealing or usage in trade, is made by NGA as to the accuracy and functioning of the product. Neither NGA nor its personnel will be liable for any claims, losses, or damages arising from or connected with the use of this product. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN GPSMAP 541

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN GPSMAP 541 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag