User manual GARMIN NAVTALKGSM

[. . . ] NavTalk ® GSM Phone/GPS owner's manual and reference guide © Copyright 2002 GARMIN Ltd. or its subsidiaries GARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. 913/397. 8200 or 800/800. 1020 Fax 913/397. 8282 GARMIN (Europe) Ltd. [. . . ] Use the ARROW key to highlight the field, then press ENTER to display the ON/OFF menu. Use the ARROW key to highlight your choice and then press ENTER. Message Beeps - Allows the NavTalk to beep when a message concerning unit operation is displayed. Voice Navigation Prompts - Allows you to turn On or Off navigation voice prompts when using the Auto-Routing feature for notification of turns or events in a route. Auto Answer - Allows you to select and activate the Auto-Answer feature. Auto-Answer automatically connects the call without the need to manually press a key to answer an incoming call. This is of particular convenience when using the NavTalk Hands-Free Kit. Auto Redial - This feature allows you to redial a number you are attempting to call when there is no answer during the initial call. The unit will automatically redial the number up to 7 times. To turn On/Off the above mentioned features: 1. Use the ARROW key to highlight the desired feature and then press ENTER to place or remove the check mark from the adjacent box. A check mark indicates that the feature is active. Message Beeps, Voice Navigation Prompts, Auto-Answer, and Auto Redial On/Off check boxes. Message Beeps Options Menu General Settings Tab NOTE: When an Auto-Redial number has been redialled repeatedly without connecting, the unit assumes that the number is not in service and places it on a blacklist. If you attempt to dial a number that has been placed on the blacklist, a message will appear to indicate that the number is on the blacklist and cannot be dialed. Another message will appear when the list is full. The list resets itself each time the unit is turned On. 55 Section 3 Phone Operation Security Settings PIN Request On/Off Menu Fixed Dialling On/Off Menu Security Security features can prevent unauthorized use and provide privacy and restrictions for use of certain phone features. PIN Request Mode - Allows you to set the Personal Identification Number request to On or Off. The On mode requires that you enter the PIN code before the NavTalk will become functional. You must also enter the PIN code before turning this mode Off. Fixed Dialling Mode - Allows you to set Fixed Dialling Mode feature to On or Off using the PIN 2 code. When Fixed Dialling is On, only those phone numbers on the List may be called using the NavTalk. Change Codes - Allows you to change the access codes for PIN 1, PIN 2 and the Network. Your service provider can set the PIN 1 code and PIN 2 code initially and inform you of the number sequence. Change Code Options Menu Security Page Enter Current PIN 1 Code To change a code 1. "Select Code" will be highlighted. Press the ENTER key to display the Code Options Menu. [. . . ] 27, 31, 59 Speed Display (Moving Avg. , Overall Avg. , Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Synchronization (Intellisync for GARMIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 V Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 61 Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]