User manual GARMIN STREET PILOT GPSCOLORMAP

[. . . ] StreetPilot GPS TM owner's manual and reference guide © 1999-2000 GARMIN Corporation GARMIN International 1200 E 151st Street, Olathe, Kansas 66062 U. S. A. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U. K. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without prior written consent of GARMIN Corporation. [. . . ] For more information on the Simulator Mode, refer to page 8. Night Mode - Night Mode alters the display colors for more comfortable viewing in dim ambient conditions. Auto mode activates the Night Mode feature between sunset and sunrise using the GPS clock for the current day of the year. Battery Type - Used to designate the type of batteries currently being used to power the StreetPilot: Alkaline or NiCad (Nickel Cadmium). This setting enables more accurate readings from the battery gauge on the Dashboard Page (see page 27). Beeper - Allows you to determine when the internal beeper sounds: Key and Message, Message Only, or None. The beep confirms that a button has been pressed or indicates a message. Distance Units - Allows you to select the desired units of measure for distance in Miles or Kilometers. If you select Miles, the speed will be shown in Miles per Hour and the elevation will be shown in feet. `General' File Tab 34 Reference `Alarms' File Tab (top right picture) `Alarms' File Tab Approaching Waypoint Alarm - Provides an alarm message once you are within a set time (choices range from 15 seconds to five minutes) from your turn or destination waypoint. As you approach the waypoint, a message occurs when your estimated arrival time is within the alarm time entered. Speed Alarm - Provides an alarm message as a reminder when your speed exceeds a preset limit. To enable/disable the speed alarm: 1. Highlight the `Speed Alarm' field and press the ENTER key. Select On or Off (as desired) and press the ENTER key. If enabling the alarm, highlight the speed in the same field and press the ENTER key. Enter the desired alarm speed using the ROCKER keypad (bottom right picture) and press the ENTER key. `Alarms' File Tab Setting the Speed Alarm 35 Reference `Time' File Tab `Time' File Tab (see top left picture) Time Format - Allows the current time to be displayed using a 12 or 24-hour clock. Tme Zone/UTC Offset - Used to determine the current local time. To set the Time Zone: 1. Follow instructions on page 12 and use the Universal Time Coordinate Offset Chart on page 72. `Time' File Tab Current Time, Current Date - Display the current time and date based on the settings made above and the information provided by the GPS satellites received. Sunrise, Sunset - Display the sunrise and sunset times for the current day of the year, based on your current location. `Time Zone' and `UTC Offset' Fields 36 Reference `Comm Port' File Tab (top right picture) `Comm Port' File Tab Serial Data Format - Allows you to control the input/output format used when connecting the StreetPilot to external devices. GARMIN Data Transfer - the proprietary format used to exchange waypoint, route, and track log data with a PC or with another StreetPilot. NMEA Out - supports the input/output of standard NMEA 0183 version 2. 3 data. None - provides no interfacing capabilities. DGPS RTCM/NMEA - allows Differential GPS (DGPS) input using a standard RTCM format and also provides NMEA 0183 version 2. 3 output. [. . . ] Sometimes known as a `breadcrumb trail'. Waypoint - A specific location on the earth. A waypoint can be used as the destination for a Direct Goto, or as part of a route. 71 Appendix G Universal Time Coordinate (UTC) Offset Chart This chart is provided to help you determine the standard time offset settings for your current location in order to set the correct time on the Time Setup Page. [. . . ]