User manual GARMIN STREETPILOT III

[. . . ] StreetPilot III portable GPS with auto-routing and voice TM owner's manual and reference guide Copyright 2002-2003 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U. S. A. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U. K. [. . . ] Use the ROCKER KEYPAD to select a saved route from the list. The unit is now ready to navigate the route. You can change the routing preferences directly from the Routes menu by pressing the MENU key. Once the new preferences are set, you can recalculate the route with the `Recalculate' option. To recalculate a Route: 1. Press the ROUTE key to view the Routes menu. Select `Recalculate' and press ENTER. The Route Preference Window appears (unless disabled). From the Route Preference window select `Faster Time', `Shorter Distance', or `Off Road' (or `Don't Ask Again'). See pages 44-45 for a description of these options. The Thumbnail Route Map appears in the lower left-hand corner of the Map page. The unit is now ready to navigate the route. To save a route, select `Save' from the Routes menu and press the `OK' button on the Route Saved window. 33 Reference Using the Routes Menu To stop a Route: 1. Press the ROUTE key to view the Routes menu. The current route becomes inactive. To resume a Route: 1. Press the ROUTE key to view the Routes menu. The current route becomes active again. To save a Route: 1. Press the ROUTE key to view the Routes menu. The Route Saved window appears, showing the active route (the route name can be edited here by selecting it, pressing ENTER and using the ROCKER KEYPAD to change the name). The StreetPilot III lets you select a specific detour distance and calculates a new route based on this information. 2. Press ENTER (`OK' button) to confirm the name and save the route . The StreetPilot III can hold up to 50 saved routes. To add a Detour: 1. Press the ROUTE key to view the Routes menu. Select the appropriate detour distance (1/2, 1, 2, 5, or 15 miles, or 1, 2, 5, 10, 30 kilometers) and press ENTER. The Route Preference window appears (unless disabled by the `Ask Me My Preference' setting under the System Setup Routing tab). From the Route Preference window, select `Faster Time', `Shorter Distance', or `Off Road' (or `Don't Ask Again') and press ENTER. [. . . ] This Route Has Consecutive Via Points The StreetPilot III only allows two consecutive user-specified via points if there are roads between these via points. This Route Has Too Many Via Points The route entered contains too many via points (intermediate destinations) and can only be navigated in an off-road, or point-to-point fashion. Note that the StreetPilot III only supports up to 100 user-specified via points. Appendix H Messages 65 Appendix H Messages Too Many Maps on Data Card The data card contains more maps than the unit software can process. Track Memory is Full Track log memory is full. [. . . ]