User manual GATEWAY ADC-320

[. . . ] Your Gateway Connected DVD Player user'sguide Installing Configuring Contents 1 Checking Out Your Gateway DVD Player . Installing batteries into the remote control . Navigating the player's Setup menus . Using the remote control in Setup menus . [. . . ] The Analog audio setup menu opens. 3 Highlight Pro Logic, then press the buttons to select: Auto (Default) Outputs stereo audio soundtracks in Dolby Pro Logic mode. On Outputs all audio soundtracks in Dolby Pro Logic mode. Off Turns off Dolby Pro Logic. 4 Highlight OK, then press ENTER. 48 www. gateway. com Setting up analog audio Adjusting center delay Use this setting to delay the sound from the center speaker so it arrives at your listening area at the same time as the left and right front speakers. Use this setting only if the center speaker is closer to your listening area than your front speakers are. To adjust the center delay: 1 On the player's remote control, press STOP, then press SETUP. The main Setup menu opens. 2 3 Use your remote control's arrow buttons to highlight Analog, then press ENTER. Delay, then press the 0 to 1. 75 milliseconds. buttons to set the delay from Assume one millisecond of delay for every one foot of difference in distance. For example, if your center speaker is one foot closer than your front speakers, set the delay to 1 millisecond. 4 Highlight OK, then press ENTER. Adjusting surround delay Use this setting to delay the sound from the surround left and right speakers so it arrives at your listening area at the same time as the left and right front speakers. Use this setting only if the surround speakers are closer to your primary listening area than your front speakers are. www. gateway. com 49 Chapter 3: Customizing To adjust the surround delay: 1 On the player's remote control, press STOP, then press SETUP. The main Setup menu opens. 2 3 Use your remote control's arrow buttons to highlight Analog, then press ENTER. Delay, then press the 0 to 5. 25 milliseconds. buttons to set the delay from Assume 1 millisecond of delay for every one foot of difference in distance. For example, if your surround speakers are one foot closer than your front speakers, set the surround delay to 1 millisecond. 4 Highlight OK, then press ENTER. 50 www. gateway. com Setting up analog audio Defining the speaker set Use this setting to identify the type of speakers in your audio setup. To define your speaker setup: 1 On the player's remote control, press STOP, then press SETUP. The main Setup menu opens. 2 3 4 Use your remote control's arrow buttons to highlight Analog, then press ENTER. Highlight Speaker Set, then press ENTER. Highlight each of the following speakers, then press the turn them on or off: buttons to Subwoofer Turns subwoofer output on or off. Surround Turns left/right surround speaker output on or off. Center Turns center speaker output on or off. 5 6 Highlight Ctr Spkr Size, then press the buttons to select Large or Small to indicate the relative size of the center speaker. Highlight OK, then press ENTER. www. gateway. com 51 Chapter 3: Customizing Setting up parental controls The Rating menu lets you block playback of DVDs by using a password-protected rating system. Not all DVDs are rated. To set parental controls: 1 On the player's remote control, press STOP, then press SETUP. The main Setup menu opens. 2 Use your remote control's arrow buttons to highlight Parental, then press ENTER. The Password menu opens. 52 www. gateway. com Setting up parental controls 3 Highlight Password, then press the following buttons to enter a four-character password: -- Move the text insertion point left and right. 0-9 buttons -- Press repeatedly to select the desired character, then press the button to save the character and move to the next character. CLEAR -- Press to erase a character. ENTER -- Press to save the password. 4 Highlight Rating, then press to change the rating level. DVDs that are rated higher than the level you select will not play without entering the correct password. If a password has already been set, you will not be able to select Rating until you enter the correct password. 5 Highlight OK, then press ENTER. Tips & Tricks If you forget the Rating password, enter 0106 to unlock the parental control setting. [. . . ] TDD technical support (for the hearing impaired) is available weekdays from 6:00 a. m. Central Time, and weekends from 6:00 a. m. Central Time. 86 www. gateway. com Specifications Video Video Out S-Video Out (separate Y and C signal output) Component Video Out (progressive/ interlace scan modes) Supported video and image formats 1. 0Vp-p 75 sync, negative polarity, RCA pin jack (1) Y: 1. 0Vp-p 75 sync, negative polarity C: 0. 286Vp-p 75 Y: 1. 0Vp-p 75 Cb: 0. 7Vp-p 75 Cr: 0. 7Vp-p 75 MPEG1: <3 Mbps MPEG2: <3 Mbps JPEG/JPG: >25 Kbps A Audio Analog Out Coaxial Out 1. 85V(rms)/10k RCA L/R pin jack (1) 0. 5Vp-p 75; RCA pin jack (1) 87 Chapter A: Specifications Optical Out Frequency response Signal-to-noise ratio Total harmonic distortion Supported audio formats Optical fiber transmitter 20 Hz to 20 kHz 90 dB Less than 0. 05% WMA: >48 Kbps MP3: >80 Kbps General Power requirements Power consumption Video standard Weight (approximate) Dimensions (approximate) 120 VAC, 60 Hz <25 W NTSC 5. 5 lbs. (2. 5 kg) DVD player: 16. 9 × 11. 6 × 2. 2 inches (430 × 295 × 55 mm) Remote control: 7. 3 × 1. 8 × 1 inches (185 × 45 × 25 mm) 88 www. gateway. com Safety, Regulatory, and Legal Information Regulatory compliance statements United States of America Federal Communications Commission (FCC) Unintentional emitter per FCC Part 15 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. [. . . ]