User manual GE SECURITY RANGER 8980 REV B

[. . . ] P ress B Y P A S S + C O D E + S en so r N o . to S T A Y T u rn C H IM E O n / O ff P ro g ra m Ma P re P re P re P re p re A p re s s b o th 1 N o D e la y 2 S ile n t 3 Pager M a k e su r e sy ste m is d isa rm e d . P re ss 7 + 1 to tu rn C H IM E o n o r o ff. ke ss ss ss ss ss su r e sy ste m is d isa rm e d . A o r B to sc ro ll th r o u g h m e n u s. [. . . ] Each partition has its own account number, so seeing the digits is useful if multiple partitions are reporting to one pager. Ask your dealer or installer if you would like the Streamline feature turned on. Event Code Sensor number or user number Figure 9. Pager Message with Streamline Feature On Concord 21 Creating Time Schedules Time schedules are windows of time defined by a start time, a stop time, and the days of the week these times are effective. You can create up to 16 time schedules for setting up the following system features: light control, output control, arming, Latchkey Paging, and Notify by Exception reports. A Touchtone phone can be used to create time schedules, but alphanumeric or fixed display touchpads work much better because of their extensive feedback. See Appendix C for phone programming instructions. At an alphanumeric or fixed display touchpad, enter programming menus by pressing 9 + System or Partition Master CODE. Press 05 nn 0 where nn is schedule 00 through 15. Enter the start time in 24-hour format (00:0023:59), then press #. The touchpad displays the new start time. To display the current stop time for this schedule, press B once. See "Opening and Closing Reports" for information on creating opening and closing schedules. See "Latchkey Paging" for information on attaching time schedules to Latchkey Paging. See "Notify By Exception" for information on attaching time schedules to Notify by Exception. Time Schedules and Partitions Once a schedule is attached to a feature event in one partition, that schedule becomes unavailable to the other partition. This prevents the situation where one partition changes a time schedule that inadvertently affects both partitions. Advanced Light Control You can control system lights from any touchpad, as discussed in "Basic Light Control". There are other lighting options that you or your installer can set up, including: Turning lights on and off according to a time schedule. Turning lights on after system arming for the duration of the Exit Delay. Turning lights on for the duration of the Entry Delay so you have enough light to see your way to the touchpad to disarm the system. Flashing lights on and off upon successful arming and disarming. Concord 23 Controlling Lights By Time Schedule Lights can be turned on according to time schedules. If you need assistance setting up a time schedule that fits your lighting needs, see "Creating Time Schedules". At an alphanumeric or fixed display touchpad, enter the programming menus by pressing 9 + System or Partition Master CODE. Press B until the touchpad displays the light number you would like to schedule. [. . . ] The touchpad displays "REGULAR USER CODES" or "REG CODES. " Press #. (You cannot delete the System Master code. ) 4. Press B until the touchpad displays the user code you wish to erase, then press #. For example, if you want to change User code 4, press # when the touchpad displays "USER 04" or "REG CODE 04. " 5. [. . . ]